Chief Delphi - IP Adress Problems

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - IP Adress Problems (http://www.chiefdelphi.com/forums/showthread.php?t=83026)

Spatacus

18-02-2010 18:23

IP Adress Problems

When we set up the IP adresses the correct way we don't get communication but when we have the classmate IP address set up to 10.24.32.5 the robot will move but the motor will be spotty and not move fluidly. How do we fix this?

Mark McLeod

18-02-2010 20:15

Re: IP Adress Problems

Since the classmate IP address is supposed to be 10.24.32.5, I'm not sure what you mean...

Spatacus

19-02-2010 18:28

Re: IP Adress Problems

I meant to say 10.24.32.6. When we have it set up to .5 the robot moves but the motors don't run fluidly.

Spatacus

20-02-2010 12:31

Re: IP Adress Problems

isnt the the IP adress of the drivers station is 10.24.32.5? when we set the IP adress of the classmate to 10.24.32.5 we have an IP adresss conflict with the drivers station.

MattD

20-02-2010 13:13

Re: IP Adress Problems

Quote:

Originally Posted by Spatacus (Post 924577)

isnt the the IP adress of the drivers station is 10.24.32.5? when we set the IP adress of the classmate to 10.24.32.5 we have an IP adresss conflict with the drivers station.

The classmate is the driver station. It is supposed to be set to 10.24.32.5 as Mark said. Are you using something else as your driver station?

As for the motors cutting out, see if you're feeding the watchdog just a little bit too late.

All times are GMT -5. The time now is 08:27.