Chief Delphi - Joystick Problem

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Joystick Problem (http://www.chiefdelphi.com/forums/showthread.php?t=83117)

The Last Don

19-02-2010 19:32

Joystick Problem

Hi There,

Im having problem with the joystick. I have program the robot to move in tank drive, but the problem is that when move one of the Joystick, the jaguar do not read the signal.
I could only go forward when I move the left Joystick forward and the right joystick sideways.

Later on I going to post a screen shot of the programming of the tank drive. Hoping that would help.

Wolfgang

19-02-2010 19:36

Re: Joystick Problem

From what it sounds like, you may have wired the x-axis value on the joystick to make the robot's right motors move. If this is not the problem, then it may not have to do with the code at all.

The Last Don

20-02-2010 02:19

Re: Joystick Problem

3 Attachment(s)

Here are the screen shot that i promise. Hopefully they would help breaking down this problem.

The Last Don

20-02-2010 16:27

Re: Joystick Problem

Quote:

Originally Posted by Wolfgang (Post 924175)

From what it sounds like, you may have wired the x-axis value on the joystick to make the robot's right motors move. If this is not the problem, then it may not have to do with the code at all.

Thank you, this have help me alot. I have found the X-axis value and change them into the y-axis value. :yikes: I appreciate your help, Thank you.

All times are GMT -5. The time now is 11:06.