Chief Delphi - FESTO Leaking Air

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)

- - FESTO Leaking Air (http://www.chiefdelphi.com/forums/showthread.php?t=83187)

sbelding

20-02-2010 15:46

FESTO Leaking Air

When we connect our FESTO to air, and it is not energized, the exhaust side is open. Is that how it works? We have hooked it up to the compressor and we are getting air leakage out of port 4.

Speeder

20-02-2010 16:27

Re: FESTO Leaking Air

Make sure your air pressure to the valve is at least 35 psi. Some valves require pressure to properly seat or transfer the internal spool of the valve.

jamie_1930

20-02-2010 16:47

Re: FESTO Leaking Air

Quote:

Originally Posted by Speeder (Post 924685)

Make sure your air pressure to the valve is at least 35 psi. Some valves require pressure to properly seat or transfer the internal spool of the valve.

For festos it is 30 psi, but a valid point, also make sure you have everything hooked up properly. Port 1 is intake, Port 3 is exhaust, and Ports 3 & 4 are your outputs.

All times are GMT -5. The time now is 12:58.