Chief Delphi - 24V cRIO digital output help

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- C/C++ (http://www.chiefdelphi.com/forums/forumdisplay.php?f=183)

- - 24V cRIO digital output help (http://www.chiefdelphi.com/forums/showthread.php?t=83188)

z.s.tar.gz

02-20-2010 04:02 PM

24V cRIO digital output help

The manual does not specify how to do this other than the alternate 'schematic'.

Can someone please point me in the right direction for using digital input/output on the cRIO?

whytheheckme

02-20-2010 05:05 PM

Re: 24V cRIO digital output help

I'm a little bit confused about your question. Which are you trying to figure out?

How to hook up a 24v Solenoid
How to hook up a 12v Solenoid
How to use the digital sidecar to attach I/O devices
Something else not here

Jacob

z.s.tar.gz

02-20-2010 05:22 PM

Re: 24V cRIO digital output help

We know how to hook it up according to the schematics, but from a C++ standpoint we don't know what to do. The manual only says for the digital sidecars and not the modules on the cRIO.

Alan Anderson

02-21-2010 12:18 AM

Re: 24V cRIO digital output help

If you're talking about the NI 9472 Digital Output module, that's controlled using the Solenoid class.

All times are GMT -5. The time now is 09:58 AM.