Chief Delphi - how do i get a pressure gauge on my driver station instead of the gyro gauge

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - how do i get a pressure gauge on my driver station instead of the gyro gauge (http://www.chiefdelphi.com/forums/showthread.php?t=83208)

2544HCRC

20-02-2010 18:52

how do i get a pressure gauge on my driver station instead of the gyro gauge

Hello Everyone,

Our team has been wondering if there is any way to i get a pressure gauge on the driver station instead of the gyro gauge. If anyone has any info let us know

Joe Ross

20-02-2010 19:46

Re: how do i get a pressure gauge on my driver station instead of the gyro gauge

You would need an analog pressure sensor if you want anything other then the binary value that the provided pressure switch provides.

eovnu87435ds

20-02-2010 23:59

Re: how do i get a pressure gauge on my driver station instead of the gyro gauge

or, if you have a pan/tilt camera on your robot, have a joystick button set the servo values to make it look at the camera, and press it again to reset. you could also place the gauge on a conveyor belt, or a thin piston, to have the gauge temporarily moved infront of the camera.

No one said it had to be high tech...

EricWilliams

23-02-2010 11:08

Re: how do i get a pressure gauge on my driver station instead of the gyro gauge

Quote:

Originally Posted by eovnu87435ds (Post 925042)

If this post wasn't so long, I'd spotlight it.

All times are GMT -5. The time now is 08:29.