Chief Delphi - Driver Station Voltage Problem

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - Driver Station Voltage Problem (http://www.chiefdelphi.com/forums/showthread.php?t=83299)

cheesepuffgd

21-02-2010 16:55

Driver Station Voltage Problem

I am a programmer on team 955. Our driver station is not displaying the voltage of the battery. It is only displaying 00.00. does anyone know what causes this to happen?::ouch::

Bryan Herbst

21-02-2010 17:12

Re: Driver Station Voltage Problem

Did you jump pins 1 and 2 on the analog bumper?

EDIT- They are the two outside pins on the set of three to the left of the actual analog pins. You should NOT jump any of the actual analog pins.

2185Bilal

04-02-2012 22:52

Re: Driver Station Voltage Problem

could like explain that a bit more

Alan Anderson

04-02-2012 23:21

Re: Driver Station Voltage Problem

See page 12 of the Getting Started with the 2012 Control System document where it describes setting up the Analog Breakout. It refers to the Analog Breakout datasheet, which has detailed pictures showing what to connect.

All times are GMT -5. The time now is 23:19.