Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: An almost-finished robot! (http://www.chiefdelphi.com/forums/showthread.php?t=83334)

Jon Stratis 02-21-2010 09:54 PM

pic: An almost-finished robot!
 

J93Wagner 02-21-2010 10:05 PM

Re: pic: An almost-finished robot!
 
Oh, I'm beginning to realize why you were in the finals in MN the past two years... xD. Looking good, your robot looks a lot more complete than ours!

mathking 02-21-2010 10:21 PM

Re: pic: An almost-finished robot!
 
That looks like a really cool robot. I hope your regional is going to be web cast so I can see those whips in action. So where did you get that carabiner?

Jon Stratis 02-22-2010 01:37 AM

Re: pic: An almost-finished robot!
 
I'm not sure where we picked up the carabiner from, but it is industrial strength, and we have two stacked next to each other to ensure it can hold our robot and then some.

Vikesrock 02-22-2010 03:23 AM

Re: pic: An almost-finished robot!
 
I was hoping to get a chance to get a look at this impressive machine this past Saturday. I guess I'll have to cross the street at some point during the regional weekend and stop by your pit to get a closer look.

Good luck!

Jon Stratis 02-23-2010 11:53 PM

Re: pic: An almost-finished robot!
 
Unfortunately, we just had too much work left to do to justify taking it over there Saturday, Vikesrock. However, we got a lot of compliments on our practice robot - a basic frame with our prototype kicker and a hastily put together electrical board can do wonders!

Vikesrock 02-23-2010 11:56 PM

Re: pic: An almost-finished robot!
 
Quote:

Originally Posted by eagle33199 (Post 927679)
Unfortunately, we just had too much work left to do to justify taking it over there Saturday, Vikesrock. However, we got a lot of compliments on our practice robot - a basic frame with our prototype kicker and a hastily put together electrical board can do wonders!

I know how that is, our robot did not make the trip down to Eagan either.

We managed to break the kicker testing last night and the dribbler never really worked so ours still isn't done. Nothing the withholding allowance and some work on Thursday shouldn't be able to fix though.


All times are GMT -5. The time now is 11:58 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi