Wiring pressure switch
 

how do you wire the pressure switch to the digital sidecar?

Re: Wiring pressure switch
 

First off: Recommend that in future you use the search feature. This question has been asked many many times before, and answered just as many.

As for the answer, take a PWM cable, and connect the two legs of the switch to the white (signal) and black(ground) wires. Plug this into a digital input on your sidecar, and program accordingly.

Re: Wiring pressure switch
 

Thank you. I did do a search, both "pressure switch" and "wiring pressure switch". nothing comes up in the first 3 or 4 pages.

Re: Wiring pressure switch
 

http://decibel.ni.com/content/docs/DOC-8855
in one of the slide of that powerpoint it shows you how to wire the pressure switch.