Crio Problem
 

Hey my friends:

Two days ago our robot was working very good, yesterday I can't move sensors, camera, encoder.But only the motor can work I dont know why, is the same program, the same conextion, I changed the wires conexion but the problem is the same I am thinking if is the problem with Crio so I want to Know if could be this problem, What happens if I reset the Crio??? the problem is common???

Thank you!!

PD: What update I need for restart the Crio??

Re: Crio Problem
 

All the updates you need are on usfirst.org, if yo haven't updated he CRIo image then that might be a part of your problem. You might also check to make sure your crio and camera are electrially isolated fom your frame, we had a CRio blow a fuse b/c it wasnt isolated. And resetig the crio basically rboots it.

Hope this helps, and sorry for the mistakes... Typing on an iPod touch is not easy!

Re: Crio Problem
 

Check your pwm system for shorts. If any of the pwms are shorting between the hot and ground, the 5 volt current will be diminished, and will not work. Check all inputs and outputs.

Hope this helps