Camera Image on Driver Station/Dashboard
 

So, our build team decided to mount the camera upside-down. And are leaving it up the programmers to fix this problem. Our driver station is (obviously) returning to us an upside-down camera image. Is there any way to flip/invert the camera image in our code?

Thanks!

Re: Camera Image on Driver Station/Dashboard
 

In Java, C++ should be very similar:

Re: Camera Image on Driver Station/Dashboard
 

Hm, would you by any chance know how to code that in LabView? That is what we are working in.

Re: Camera Image on Driver Station/Dashboard
 

for some reason changing camera settings in the code never seems to work right. my suggestion is to connect the camera to a computer with a crossover cable, go into a web browser, type in its IP address (ours is 192.168.0.90, i believe yours is supposed to be the same) password should be root and then admin (if this is your programming laptop, make sure to change your ip address so that it starts with 192.168.0.x instead of 10.x.x.x) through the web browser you can access the video settings and flip the image 180 degrees

Re: Camera Image on Driver Station/Dashboard
 

If you open Begin.vi, it already sets about six camera parameters. I don't actually see a Set Property VI for setting the camera rotation, though. It would be pretty easy to build.

Do you want this for processing on the robot, or for display on the dashboard. I'd suggest leaving it alone on the robot and simply flipping the resulting X,Y. Then rotate it on the dashboard. This will consume less cRIO CPU.

Greg McKaskle

Re: Camera Image on Driver Station/Dashboard
 

We woulkd like to have it for the dashboard.

Where can I chane the x and y, and how do I flip this image?

Re: Camera Image on Driver Station/Dashboard
 

To rotate or modify it for the dashboard, use the IMAQ functions in Vision>>Vision Utilities>>Image Manipulation, and either the IMAQ Symmetry to mirror and flip, or the IMAQ Rotate to spin.

Greg McKaskle

Re: Camera Image on Driver Station/Dashboard
 

if you loosen the screw on the post of the camera you can just put it right side up with the mount on the top opposed to reprograming it

Re: Camera Image on Driver Station/Dashboard
 

I found those VIs. Where in my code would it be best to place it?

Re: Camera Image on Driver Station/Dashboard
 

You want to place it in your Dashboard, after the "get image on PC" vi.