Chief Delphi - pic: Team 1625 Vacuum

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Team 1625 Vacuum (http://www.chiefdelphi.com/forums/showthread.php?t=83610)

Carrington

25-02-2010 15:18

pic: Team 1625 Vacuum

IKE	25-02-2010 15:20

Re: pic: Team 1625 Vacuum

This looks really neat, but what exactly am i looking at?
I see CIM driving an overgeared (5:1ish) axle to which I assume at least 1, and possible 3 impellors are hooked up.

neshera

25-02-2010 15:40

Re: pic: Team 1625 Vacuum

What you can't see is Carrington's blood, sweat, and tears in there.

Lowfategg

25-02-2010 15:47

Re: pic: Team 1625 Vacuum

How many amps does this baby pull?

coldfusion1279

25-02-2010 16:05

Re: pic: Team 1625 Vacuum

Whoa 3 impellers? 1 just wasn't good enough for you was it?

Aren_Hill

25-02-2010 19:08

Re: pic: Team 1625 Vacuum

Its been reduced to 2 fan units out of OREK brand upright vacuum cleaners. A central shaft runs down the middle driving both fans.

http://www.chiefdelphi.com/forums/sh...ht=1625+teaser

two of these are present to allow a suction inlet and let the shaft pass through to drive the next fan.

Another reason we went with these units was to have access to the exhaust flow for an initial concept with an inflated pillow on top of the robot :D

This has been Carringtons (TheLoneAsian) project this season.

@Tyler
Not a clue, doesnt get too hot though

All times are GMT -5. The time now is 12:57.