Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Team 980 Breakaway robot (http://www.chiefdelphi.com/forums/showthread.php?t=83643)

David Brinza 26-02-2010 11:41

pic: Team 980 Breakaway robot
 

Chris Fultz 26-02-2010 11:42

Re: pic: Team 980 Breakaway robot
 
Nice. I like the belt drive. Were you able to take advantage of the Gates offer?

David Brinza 26-02-2010 12:23

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by Chris Fultz (Post 928930)
Nice. I like the belt drive. Were you able to take advantage of the Gates offer?

Unfortunately, the Gates offer didn't include belt sprockets quite large enough (D = 5.5"). Our custom sprockets were fabricated by our new team member, Schroeder Torsion Bars in Burbank.

drtysteve384 26-02-2010 12:41

Re: pic: Team 980 Breakaway robot
 
nice looking robot, how do you move the ball and it looks like you have a ball holder... no chain either?

David Brinza 26-02-2010 13:18

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by drtysteve384 (Post 928951)
nice looking robot, how do you move the ball and it looks like you have a ball holder... no chain either?

No chain in our robot this year.

The foam roller provides ball control and is driven via a CIM/AM planetary gear combination using belt drive. The kicker is driven by enclosed compression springs with a pivot point that puts the kicker "over center" in the cocked position. A winch using two window motors reels up the kicker. We use a large cam on another window motor to push the kicker down through center to fire the shot. The kicking mechanism requires just three limit switches for operation: one on the kicker, one on the winch, and one on the cam.

Lil' Lavery 26-02-2010 13:39

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by David Brinza (Post 928943)
Unfortunately, the Gates offer didn't include belt sprockets quite large enough (D = 5.5"). Our custom sprockets were fabricated by our new team member, Schroeder Torsion Bars in Burbank.

Why such large sprockes? Are you using your belts to double as a tread drive while you go over the bump?

RogerR 26-02-2010 13:45

Re: pic: Team 980 Breakaway robot
 
It appears that you have a suspension on the front wheels, with the pivot 3"-4" ahead of the center wheel axle. If this is the case, it seems as though the center to center distance will change between the front and middle wheels, which would lead to the belt tensioning and loosening based on were the front suspension is in its travel.

If the above is true, how do you handle this?

Chris is me 26-02-2010 14:32

Re: pic: Team 980 Breakaway robot
 
Early in the season there was talk on 1714 of using a 6 wheel drive with pulleys between the wheels like this one to double as power transmission and bump climbing aid. Is this why you guys decided to go for timing belt, or did you guys have other reasons? I'm interested in alternatives to roller chain for drivetrains, so any info is appreciated.

David Brinza 26-02-2010 14:44

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by Lil' Lavery (Post 928976)
Why such large sprockets? Are you using your belts to double as a tread drive while you go over the bump?

Exactly. The treads are off the floor except when we traverse the bump.

Quote:

Originally Posted by RogerR (Post 928980)
It appears that you have a suspension on the front wheels, with the pivot 3"-4" ahead of the center wheel axle. If this is the case, it seems as though the center to center distance will change between the front and middle wheels, which would lead to the belt tensioning and loosening based on were the front suspension is in its travel.

If the above is true, how do you handle this?

The center-to-center distance radius is large, but the compression of the shock is quite limited, so the amount of tension change isn't large. We are considering a very simple idler (just a roller on a spring), if we find belt slippage to be a problem.

Quote:

Originally Posted by Chris is me (Post 929001)
Early in the season there was talk on 1714 of using a 6 wheel drive with pulleys between the wheels like this one to double as power transmission and bump climbing aid. Is this why you guys decided to go for timing belt, or did you guys have other reasons? I'm interested in alternatives to roller chain for drivetrains, so any info is appreciated.

Yes, "dual use" mentality was at work here. This is the first time we've deviated from chain in our drive system. We'll know in two weeks whether we made the right call.

Ryan_Epperson 02-03-2010 04:43

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by David Brinza (Post 929004)
Exactly. The treads are off the floor except when we traverse the bump.

Food for thought...

http://forums.usfirst.org/showthread...ighlight=chain


I know the teams that I mentor saw it as no issue they were designing their robots as well... Looks like we are going to be ordering smaller gears and installing them on thursday!

Good luck!

Chris is me 02-03-2010 04:45

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by Ryan_Epperson (Post 930394)
Food for thought...

http://forums.usfirst.org/showthread...ighlight=chain


I know the teams that I mentor saw it as no issue they were designing their robots as well... Looks like we are going to be ordering smaller gears and installing them on thursday!

Good luck!

Belt drive isn't metal so it doesn't break the rule cited above.

Ryan_Epperson 02-03-2010 04:54

Re: pic: Team 980 Breakaway robot
 
good to know...

I would think that Belts are going to have more traction than metal, but that's just me.

Chris is me 02-03-2010 06:27

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by Ryan_Epperson (Post 930396)
good to know...

I would think that Belts are going to have more traction than metal, but that's just me.

They probably do (though less than roughtop). The rule doesn't limit traction, just metal as a traction aid (mainly due to carpet damage, etc).

Ryan_Epperson 02-03-2010 14:16

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by Chris is me (Post 930397)
They probably do (though less than roughtop). The rule doesn't limit traction, just metal as a traction aid (mainly due to carpet damage, etc).


That's what it seemed like to me. The chain on the Robot only brushes the carpet and in the 20+ times that they floored it over the bump the wheels were the only thing that ended up being damaged, the carpet was perfectly fine. So this would leave me to want to think that they are on then... but we need to check it out on thursday on the practice field to be sure

David Brinza 02-03-2010 18:21

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by Ryan_Epperson (Post 930561)
That's what it seemed like to me. The chain on the Robot only brushes the carpet and in the 20+ times that they floored it over the bump the wheels were the only thing that ended up being damaged, the carpet was perfectly fine. So this would leave me to want to think that they are on then... but we need to check it out on thursday on the practice field to be sure

The way <R08> reads,
ROBOT wheels, tracks, and other parts intended to provide traction on the carpet may be purchased or fabricated (“traction devices” include all parts of the ROBOT that are designed to transmit any propulsive and/or braking forces between the ROBOT and the FIELD). In no case will traction devices that damage the carpet or other playing surfaces be permitted. Traction devices shall not have surface features such as metal, sandpaper, hard plastic studs, cleats, or other attachments. <snip>
I doubt inspectors will allow a chain that contacts the field. Chains close enough to the circumference of the wheel as to contact the field on a bump will provide (however small) propulsive and/or braking forces to the robot. Chains are made of metal, hence they are prohibited as traction devices. I would also worry about lubricant in the chain transferring to the carpet, thus violating <R36>.

Ryan_Epperson 03-03-2010 15:38

Re: pic: Team 980 Breakaway robot
 
Quote:

Originally Posted by David Brinza (Post 930660)
The way <R08> reads,
ROBOT wheels, tracks, and other parts intended to provide traction on the carpet may be purchased or fabricated (“traction devices” include all parts of the ROBOT that are designed to transmit any propulsive and/or braking forces between the ROBOT and the FIELD). In no case will traction devices that damage the carpet or other playing surfaces be permitted. Traction devices shall not have surface features such as metal, sandpaper, hard plastic studs, cleats, or other attachments. <snip>
I doubt inspectors will allow a chain that contacts the field. Chains close enough to the circumference of the wheel as to contact the field on a bump will provide (however small) propulsive and/or braking forces to the robot. Chains are made of metal, hence they are prohibited as traction devices. I would also worry about lubricant in the chain transferring to the carpet, thus violating <R36>.


I agree. We are purchasing new gears as we speak and will be re-vamping the drive-terrain on thursday if it does in fact contact the carpet.

Doug G 03-03-2010 16:03

Re: pic: Team 980 Breakaway robot
 
We too tried the belt drive system this year and it initially tested out pretty well, but when we added weight and really pushed it hard, the belts stripped out fairly quick (not all were properly tensioned). Do not even try to run belts without proper tension!!!

sdcantrell56 03-03-2010 19:55

Re: pic: Team 980 Breakaway robot
 
we're running belts this year with 2 cims and 1 fp per side and have not had any problems with them at all. We of course have them tensioned but other than that set up has been super easy and theyre much cleaner than chain.


All times are GMT -5. The time now is 04:28.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi