Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Modification to Cypress Carrier Enclosure (http://www.chiefdelphi.com/forums/showthread.php?t=83646)

Chris Fultz 26-02-2010 13:44
pic: Modification to Cypress Carrier Enclosure
 

Chris Fultz 26-02-2010 13:46
Re: pic: Modification to Cypress Carrier Enclosure
 
We are mounting the Cypress Carrier / Enclosure on the underside of our control board and wanted to be able to mount it and then add the wiring, and have access in case of changes.

Here is a picture of a minor mod we completed to the cover piece to allow access to the set screws without removing the assembly.

eStop Robotics 26-02-2010 16:05
Re: pic: Modification to Cypress Carrier Enclosure
 
Quote:
Originally Posted by Chris Fultz (Post 928981)
We are mounting the Cypress Carrier / Enclosure on the underside of our control board and wanted to be able to mount it and then add the wiring, and have access in case of changes.

Here is a picture of a minor mod we completed to the cover piece to allow access to the set screws without removing the assembly.
This is an excellent modification!

We have received this suggestion from other customers for a future version of the Cypress Carrier Enclosure.

Good Luck!!


All times are GMT -5. The time now is 09:37.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi