Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: FRC 2753, Team Overdrive 2010 Robot (http://www.chiefdelphi.com/forums/showthread.php?t=83653)

Lowfategg 26-02-2010 17:32

pic: FRC 2753, Team Overdrive 2010 Robot
 

sgreco 26-02-2010 17:33

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Looks good!

I hope you guys are as good as you were last year!

Any video?

Akash Rastogi 26-02-2010 17:36

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Now the question is: Who's pit will you be in at Trenton? :rolleyes:

BrendanB 26-02-2010 17:42

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Beautiful robot! Looks a lot like,http://www.chiefdelphi.com/media/photos/34967 :p ;) EDIT: Oh, forgot to read the (co-development with 2016 part!)

Einstein 2010?! Good luck guys!

ks_mumupsi 26-02-2010 17:59

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Quote:

Originally Posted by Akash Rastogi (Post 929087)
Now the question is: Who's pit will you be in at Trenton? :rolleyes:

lol... thats not a question :P

but yes its good to see Overdrives pic finally up, as we mentioned earlier done together with 2016.

see ya guys in jersey.

nlknauss 27-02-2010 15:23

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Yeah Overdrive!!

Coach Tom 28-02-2010 14:58

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
After considering R16 (a little late), Team Overdrive will need to counter sink our drive shaft bolts and grind our exterior welds at the NJ Regional.

Not a big deal, but certainly not what we wanted to do.

Akash Rastogi 28-02-2010 15:02

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Quote:

Originally Posted by Coach Tom (Post 929748)
After considering R16 (a little late), Team Overdrive will need to counter sink our drive shaft bolts and grind our exterior welds at the NJ Regional.

Not a big deal, but certainly not what we wanted to do.

If you guys need an extra angle grinder for NJ, let me know.:)

rcmolloy 28-02-2010 18:00

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Congrats on a great looking robot! Can't wait to see you guys in action and hopefully play with or maybe against Overdrive. See you guys in a few weeks!

Chris is me 28-02-2010 18:05

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Quote:

Originally Posted by Coach Tom (Post 929748)
After considering R16 (a little late), Team Overdrive will need to counter sink our drive shaft bolts and grind our exterior welds at the NJ Regional.

Not a big deal, but certainly not what we wanted to do.

Are you guys able to put shims around the BUMPER PERIMETER? This might be easier than grinding your frame down.

jblay 28-02-2010 18:30

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Great looking bot. Looks like another good bot to check out at NJ, it looks like the regional is going to be stacked

Coach Tom 28-02-2010 19:06

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
[quote=Chris is me;929804]Are you guys able to put shims around the BUMPER PERIMETER? This might be easier than grinding your frame down.[/QUOTE


We might do the shim. I will leave it up to the students. Knowing the Team Overdrive students, however, I'm guessing they will want to bring the robot into compliance without compromising some of the bumper strength.

Cyberphil 28-02-2010 20:44

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Its not as epic without the yellow. :( But im sure its epicness will be shown through its performance. Great bot guys, and good luck!

howelles 28-02-2010 22:23

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Quote:

Originally Posted by Lowfategg (Post 929081)

Once again it looks like you are setting the standard high. Best wishes and hope to see you again this year.

Barngirl425 01-03-2010 14:47

Re: pic: FRC 2753, Team Overdrive 2010 Robot
 
Nice Bot! Cant wait to see you guys in Trenton!


All times are GMT -5. The time now is 23:05.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi