Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)
-   -   Jaguar Brake/coast (http://www.chiefdelphi.com/forums/showthread.php?t=83959)

Ether 16-03-2010 19:20
Re: Jaguar Brake/coast
 
Quote:
Originally Posted by Al Skierkiewicz (Post 937783)
Ether,
I was referring to Figure 2 on page 8.
That's not a pullup. It's a series resistor to limit current through the LED.

EricVanWyk says the IO states of the DS GPIO are power/ground:

http://www.chiefdelphi.com/forums/sh...75&postcount=2

... so no pullup is required.


~


All times are GMT -5. The time now is 16:59.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi