Chief Delphi
Page 2 of 6 < 1 2 3456 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Vertical Pipe Hanging (http://www.chiefdelphi.com/forums/showthread.php?t=84595)

carolyn 23-03-2010 21:29
Re: Vertical Pipe Hanging
 
78 hangs from the side bar, but doesn't flip.

littlek050844 23-03-2010 21:29
Re: Vertical Pipe Hanging
 
At Cass Tech they seemed to be doing just fine with the bumps and handeling them.

BJC 23-03-2010 21:35
Re: Vertical Pipe Hanging
 
This weekend our hangers gona be much faster (and more colorful). YAAY:D

PS. to RUSH, I think this makes us arch rivals, In a good kind of way;)

BJC 23-03-2010 21:41
Re: Vertical Pipe Hanging
 
Quote:
Originally Posted by littlek050844 (Post 942151)
At Cass Tech they seemed to be doing just fine with the bumps and handeling them.
I'd agree they are very nimble while going over the bump now. In fact, I'm not even sure they couldn't go over forwards before their arm was taken off, Its just that it wasn't shown in the video.

Zach O 23-03-2010 21:43
Re: Vertical Pipe Hanging
 
When pit scouting, someone from 910 said they could hang from the vertical bar and drive up it. I NEVER saw this happen however, so I won't stay they can for sure. Did any else hear that and can confirm/deny this data?

BJC 23-03-2010 21:46
Re: Vertical Pipe Hanging
 
Quote:
Originally Posted by Zach O (Post 942159)
When pit scouting, someone from 910 said they could hang from the vertical bar and drive up it. I NEVER saw this happen however, so I won't stay they can for sure. Did any else hear that and can confirm/deny this data?
Well, how recent was this? at Kettering they had nothing of the sort on their robot, although I wouldn't be suprised if they have built something since and are planning on using it this weekend.

littlek050844 23-03-2010 21:51
Re: Vertical Pipe Hanging
 
It had to be at kettering becaue that is the only district they have competed in and i was at kettering and i saw no sign that hey could hang with their robot.

Zach O 23-03-2010 21:53
Re: Vertical Pipe Hanging
 
Quote:
Originally Posted by BJC (Post 942163)
Well, how recent was this? at Kettering they had nothing of the sort on their robot, although I wouldn't be suprised if they have built something since and are planning on using it this weekend.
It was at Kettering they they said that. I'm going to double check it at Troy and confirm or deny this.

Chris is me 23-03-2010 21:54
Re: Vertical Pipe Hanging
 
Quote:
Originally Posted by Zach O (Post 942159)
When pit scouting, someone from 910 said they could hang from the vertical bar and drive up it. I NEVER saw this happen however, so I won't stay they can for sure. Did any else hear that and can confirm/deny this data?
They could have been kidding, like when people tell you they have a billion wheels on their robot and it can fly. Sometimes some sarcastic team members will tell you this if you ask them something that's obviously not true (asking a kitbot if they can suspend robots, for example)

Dillon Carey 23-03-2010 22:00
Re: Vertical Pipe Hanging
 
Quote:
Originally Posted by Jamie Kalb (Post 942129)
254 uses a two-jointed arm that folds entirely into their frame. Because of this, it's the only robot I've seen that hangs this way AND can go through the tunnel.
Our robot also has a double jointed arm that enables us to hang vertically and still go through the tunnel.

http://www.youtube.com/watch?v=U7sXWhHfULs

Zach O 23-03-2010 22:05
Re: Vertical Pipe Hanging
 
Quote:
Originally Posted by Chris is me (Post 942174)
They could have been kidding, like when people tell you they have a billion wheels on their robot and it can fly.
I'm sure they weren't kidding. I talked to one of their mentors also (although that doesn't make a difference). I also can only find one picture, which is no help at all. http://www.flickr.com/photos/daniele...7623582837940/

From what I can see, it lacks any sort of hanging mechanism...

johnr 23-03-2010 22:09
Re: Vertical Pipe Hanging
 
910 was working on the whole drive up the pole thing and the parts were on at kettering but not working. They may be ditching that idea to use the weight some place else.

ervtech 23-03-2010 22:09
Re: Vertical Pipe Hanging
 
1218 hangs form one of the vertical poles

BradMello 23-03-2010 22:10
Re: Vertical Pipe Hanging
 
Quote:
Originally Posted by carolyn (Post 942150)
78 hangs from the side bar, but doesn't flip.
Yes we drive up the pole, worked flawlessly during elims at GSR

Zach O 23-03-2010 22:14
Re: Vertical Pipe Hanging
 
Quote:
Originally Posted by johnr (Post 942195)
910 was working on the whole drive up the pole thing and the parts were on at kettering but not working. They may be ditching that idea to use the weight some place else.
Thank you! :yikes:


All times are GMT -5. The time now is 17:08.
Page 2 of 6 < 1 2 3456 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi