Chief Delphi - Banebots P80 Key Dimensions

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Banebots P80 Key Dimensions (http://www.chiefdelphi.com/forums/showthread.php?t=84716)

Spirator

28-03-2010 07:42

Banebots P80 Key Dimensions

Hey CD,

I was just wondering if anyone knew the dimensions for the machine key int he Banebots P80 gearbox. I looked at Banebots, but I'm not sure what they mean. We're trying to manufacture a steel key and I need to know the width of the key so it will fit into the gearbox shaft.

Thanks.

NOV8R

28-03-2010 07:59

Re: Banebots P80 Key Dimensions

1/8 x 1/8 square

Spirator

28-03-2010 08:11

Re: Banebots P80 Key Dimensions

Thank you very much. Also, do you know how deep the key in the shaft is?

NOV8R

28-03-2010 10:16

Re: Banebots P80 Key Dimensions

The key is 1/16 deep in both the shaft and hub for a total of 1/8. If your asking about how long, one inch long keys are used in hubs like those from AndyMark.

All times are GMT -5. The time now is 14:41.