Chief Delphi - Closed Loop Speed Control

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Closed Loop Speed Control (http://www.chiefdelphi.com/forums/showthread.php?t=84751)

Ether

29-03-2010 20:51

Re: Closed Loop Speed Control

Quote:

Originally Posted by Mark McLeod (Post 945329)

You can test the Jaguar limit inputs for yourself (I did) under PWM control.
Simply pull out the jumpers one at at time test Jaguar motion and replace.

What a great idea. And so easy. Thanks.

If I had more convenient access to the hardware I'd probably start thinking along those lines more often.

~

Mark McLeod

29-03-2010 21:27

Re: Closed Loop Speed Control

My point of course is that testing or other direct experience (sometimes bad experiences) will be the source of most of the answers you find on this forum.

Authoritative answers in the traditional sense, such as Eric's and Greg's, are rare.

All times are GMT -5. The time now is 22:01.

Page 2 of 2

Show 100 post(s) from this thread on one page