Battery charging carts?
 

Does anybody have any good ideas for a battery cart that charges FRC batteries in the pit?

Or does anybody have any pictures of one/

thanks!

Re: Battery charging carts?
 

Paragon, Team 571 has a paper posted in the white papers section for building one. We're building one based on it.

Re: Battery charging carts?
 

I won't be at the site until Monday, but I will get a picture of the 571 one and post it here if another member doesn't already :)

Re: Battery charging carts?
 

We have used the one pictured below for 5 years, and a number of other teams have built duplicates from the plans.
Key features: Easy to build, Easy to move, Minimal Footprint when upright, holds 8 batteries and 4 chargers, one person loadable into a truck/van.
PM me and I can send the Inventor model and build drawings if you are interested.

Re: Battery charging carts?
 

my team has very good one but it's in the robot box and I think it will return from Atlanta next month. basicly it's 5 shelf cart. every shelf is in the size of 2.5 batteries and the depth of every shelf is a depth of one battery.
when it's not in use we have place in every shelf to 2 batteries and one charger. when it's in use, all the chargers are standing on the top of the cart so it will be visible thatit's working and more safty to everybody!
when the robot will rturn froom atlanta I will post a picture.

Re: Battery charging carts?
 

Ours is similar to the one Jim Zondag is talking about. It's also diamond plated. If you want pictures let me know and I will see what I can do. :)

Cass

Re: Battery charging carts?
 

Here is ours.

Re: Battery charging carts?
 

This is our battery cart. It uses a KOP tote, with 4 chargers, and can hold 8 batteries. The cart itself has 4 casters and a fold-down handle for easy transport. C-Channel is used to make a lip around the tote so that it cannot slide off the cart. The wood seen is 5-ply, because the original steel cart buckled under the weight of the batteries. As such, we stole the handle and casters off of it, and built the new one out of plywood. Also, there is a plug strip on one wall of the tote, to connect the chargers, and also programming laptops in the pits.

Re: Battery charging carts?
 

last year we built one out of wood:



the back/shelves are 1/2" plywood. the sides are white ash.

it was later finished with green stain and our logo dremel-routered in and painted in black... i have pics somewhere of it...

Re: Battery charging carts?
 

639 made 2 battery "arks". It's basically a long toolkit with a handle on each end. Roof is made of thin cardboard (waterproofed with duct tape!). 4 people can cary them into competition, set them down in our pits, then we get out a power strip and plug in the chargers. All of our good batteries and chargers can fit in them with room to spare. It also can make it very easy to pick out a battery. Highest charged ones are kept on the side closest to the robot, just slide them all forward when you swap a battery out.

When we're at home we just have a tote with wheels that carries everything

Re: Battery charging carts?
 

Our team (2481 - Roboteers) has a crowd attracting cart. We always have people asking us about it and taking picture of it at the Wisconsin Regional. Some of its features include:

-4 charging ports
-Automatic voltage refreshing system linked to a flat panel monitor (allows us to tell when we achieve optimum charge)
-Under-glow!
-Upgraded wheels that can handle the weight of all our batteries and charging equipment for easy transportation

Unfortunately, I do not have a picture at this time but should be able to post one as soon as Monday!

Re: Battery charging carts?
 

Ours has two shelves, each hold six batteries. The chargers themselves are Auto Meter chargers that can charge up to six batteries each (they are pricey, we had the assistance of our school district to pay for them). The whole thing is attached to a dolly.




Chargers can be found here: http://test.autometer.com/productDet...D=54&isKi t=0

Re: Battery charging carts?
 

Our cart can carry and charge up to 12 batteries and is attached to a dolly. We mounted two Autometer battery chargers to the sides of the cart. The chargers can be found here: http://www.usatoolwarehouse.com/usat...BUSPRO660.html. (They are pricey, but they work great. We had our school district help pay for part of them.)

Re: Battery charging carts?
 

1714's had one since 2007. We got help from Rockwell Automation on the project; I believe they donated a lot of the parts including the touch screen. If you guys send our head mentor an email, he can get you more information than I am. Since you guys are also a Rockwell Automation team, you can probably get the same amount of help we did.

Re: Battery charging carts?
 

http://www.chiefdelphi.com/media/photos/25703

We bought this Interactor 5 bay charger in 2006. Interactor even supplied the unit with the Anderson Power Pole connectors installed. This unit is compact and requires only one power outlet. Don't quote me on this, but at the time the entire charger was cheaper than 5 individual Interactor brand chargers.

We built a wheeled cart around the unit as well. I'll have to get a picture to post.