Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Sheetmetal 8wd (http://www.chiefdelphi.com/forums/showthread.php?t=85619)

Akash Rastogi 01-05-2010 13:29

pic: Sheetmetal 8wd
 

RMS11 01-05-2010 13:32

Re: pic: Sheetmetal 8wd
 
Looks really cool! A few questions:
Why did you decide to do 4 gearboxes instead of 2, as 2 would probably save weight.
I cant tell from the pic, but how are those crossbeams attached? Are they made of bent aluminum? Was there a structural reason to put the front cross beam at an angle?
Also, what was the weight as it?
Again, looks great!

Chris is me 01-05-2010 13:46

Re: pic: Sheetmetal 8wd
 
More importantly, when's this showing up on Shaker's doorstep? We need it before July...

Oh, it's a render. Silly me. ;)

Jstack14 01-05-2010 13:48

Re: pic: Sheetmetal 8wd
 
Seems very complex considering how simple it could be...BUT...it looks awesome and 4 toughboxs with 4 cims is very powerful! If only i could have that drive i would enjoy playing with it.

Akash Rastogi 01-05-2010 14:43

Re: pic: Sheetmetal 8wd
 
Quote:

Originally Posted by Jstack14 (Post 959413)
Seems very complex considering how simple it could be...BUT...it looks awesome and 4 toughboxs with 4 cims is very powerful! If only i could have that drive i would enjoy playing with it.

There's nothing complex about it. I'm kinda curious about what you mean. The drive itself is very simple direct drive and then the corners are dead axle chained to the direct driven wheels. If you mean the lightening pattern, then yes, I made it a bit too random. I will be changing it to be a bit more structurally sound.

I chose 4 nanos because it made for the shortest runs of chain. I've also been playing around with the versatility of the nano a lot lately. (We also have some laying around).

Total weight was 26lb. with everything and some parts being .125" along with .09" thick.

Oh and no the angle of the crossmembers was just aesthetics. They are also bent sheetmetal.

.

sanddrag 01-05-2010 17:07

Re: pic: Sheetmetal 8wd
 
If you have a sponsor shop where all they do is make this kind of stuff all day, and you have the proficiency to design this kind of stuff well (I do not), then this is REALLY the way to build an FRC robot in a short amount of time. It is so fast and easy to burn (or jet) all this out because the actual amount of material removed is so small, compared to milling. The amount of time saved over milling and welding more solid-type parts can be tremendous.

Akash Rastogi 01-05-2010 17:52

Re: pic: Sheetmetal 8wd
 
I'm thinking that with 4" wheels I can rework the geometry a little and place the CIMs inside the modules and save some space while still keeping it direct drive.
http://s656.photobucket.com/albums/u...l_Assembly.jpg

The blue and white are 2791 colors.

s_forbes 01-05-2010 18:25

Re: pic: Sheetmetal 8wd
 
One thing I would be worried about with this design: It looks like the crossmembers are only attached on their ends. Being c-channels, you would probably see a lot of flex in the whole chassis. It would likely survive through competition, but I would be hesitant to use it.

Since you are designing it with sheet metal, you have the unique ability to make very large structural members that are still very light. Monocoque style construction is something that can be employed fairly easily and will result in a very stiff, very strong chassis.

Dave McLaughlin 01-05-2010 18:40

Re: pic: Sheetmetal 8wd
 
I know that 233 had a similar drive set up as you do hear this year, but ended up chaining the two gearboxes on each side together. I'm not sure exactly, but I think it was due to torque problems when the front 4 wheels lifted off the ground when crossing the bump. Just something to consider.

O'Sancheski 01-05-2010 18:48

Re: pic: Sheetmetal 8wd
 
What program did you use?

Can I have the CAD files... I would love to show this to my team... Looks really nice btw...

Tom Line 01-05-2010 19:44

Re: pic: Sheetmetal 8wd
 
Sheet metal chassis like look HUGE, but in reality are a lot of empty space. I've really appreciated the look of the 217 / 148 / 1114 robots the last couple of years - they simply look physically imposing because of the lack of open space: they look massive.

One question though on this type of constructive. I imagine one of the trickiest parts of making a sheet-metal frame of this sort is doing the force modeling to understand where you can and cannot remove material.

How are you going about that?

Akash Rastogi 01-05-2010 20:24

Re: pic: Sheetmetal 8wd
 
Quote:

Originally Posted by Tom Line (Post 959484)
Sheet metal chassis like look HUGE, but in reality are a lot of empty space. I've really appreciated the look of the 217 / 148 / 1114 robots the last couple of years - they simply look physically imposing because of the lack of open space: they look massive.

One question though on this type of constructive. I imagine one of the trickiest parts of making a sheet-metal frame of this sort is doing the force modeling to understand where you can and cannot remove material.

How are you going about that?

The entire pattern on this was done incorrectly and very hastily, I did not look at the loads that well. I am redoing the pocketing right now. Obviously I made all mounting holes like JVN said and then carefully pocketed leaving .75" in between everything in the second iteration. Mostly I've been studying the CAD from 148's 07-09 bots along with a few others and just working off of that.

I also redid the assembly to make it monocoque. I'll post it up later tonight.

.

Akash Rastogi 01-05-2010 22:14

Re: pic: Sheetmetal 8wd
 
Ok so I redid a lot of the suggested stuff and restructured the trussing.

http://s656.photobucket.com/albums/u..._sheet_8wd.jpg

http://s656.photobucket.com/albums/u...heet_8wd_2.jpg

http://s656.photobucket.com/albums/u...AssemblyV2.jpg

sdcantrell56 01-05-2010 22:20

Re: pic: Sheetmetal 8wd
 
It seems to me that you could easily cut the height in half and save a bunch of weight that way. Also you need to think about some type of belly pan both to mount electronics and to greatly increase the strength of the whole assembly.

Also the cutout in the middle could be decreased a bunch. It looks to me like the limit to ground clearance will be the area between the middle and outer wheels and not the area between the middle wheels. There no need in having the middle have way more clearance. It just weakens things and makes it more difficult to run chains, plus raises the area where you can mount electronics, thus raising the center of gravity of the whole thing.

Akash Rastogi 01-05-2010 22:31

Re: pic: Sheetmetal 8wd
 
Quote:

Originally Posted by sdcantrell56 (Post 959527)
It seems to me that you could easily cut the height in half and save a bunch of weight that way. Also you need to think about some type of belly pan both to mount electronics and to greatly increase the strength of the whole assembly.

Also the cutout in the middle could be decreased a bunch. It looks to me like the limit to ground clearance will be the area between the middle and outer wheels and not the area between the middle wheels. There no need in having the middle have way more clearance. It just weakens things and makes it more difficult to run chains, plus raises the area where you can mount electronics, thus raising the center of gravity of the whole thing.

I'll have to change it tomorrow, haha, been spending too much time with CAD instead of studying for APs. The height for right now was just set to make the GDC and their 2010 bumper rules happy.

Thanks for the suggestions and changes everyone.


All times are GMT -5. The time now is 06:10.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi