Help with PSoC board wiring please
 

hi im wondering how to wire up switches to the bread board, where does the signal wire and where does the ground wire go??

Re: Help with PSoC board wiring please
 

Here is a photo of the pinout of the IO board: http://www.chiefdelphi.com/forums/at...2&d=1264090529


For switches:

• Ground wire connects to either of the pins labeled "Gnd"
• Signal wire connects to any of the pins labeled "Digital input"

For potentiometers:

• Ground wire connects to either of the pins labeled "Gnd"
• Signal wire connects to any pin labeled "Analog input"
• Power wire connects to either of the pins labeled "VDDIO"

When you have the I/O board mounted on the breadboard, one column of pins should be directly accessable via the breadboard, but the other column will need extension wires under the I/O board that bring out the pins that you need to get at to an outside breadboard row you can connect to.