Linksys Router (WRT610N V1) Connection Problem
 

My linksys router Model WRT610N V1 is connected into the modem, and when I try to use the FRC issued laptop and connect to the router. It does not connect so I reset the router, to somehow, fix the problem. Nothing seems to be working, and I was hoping if anyone could provide tips or help to solve the issue.

Re: Linksys Router (WRT610N V1) Connection Problem
 

When you say "the modem" what device are you referring to?

Classmate ethernet port should be connected to one of the router's ethernet ports with an ethernet cable. Check?

Classmate IP address 10.xx.yy.5. Check?

Router IP address is 10.xx.yy.4. Check?

Open a browser on the Classmate and type 10.xx.yy.4 into the address box and you should see the router's setup screen. Check?

Follow the instructions in this document and tell us at which step the problems start.

Re: Linksys Router (WRT610N V1) Connection Problem
 

You say your connecting to a modem, why?

Re: Linksys Router (WRT610N V1) Connection Problem
 

When you say "the modem" what device are you referring to?
I connected the router to the main modem, which is plugged into several other computers.

Classmate ethernet port should be connected to one of the router's ethernet ports with an ethernet cable. Check?
i dont understand what you mean by this

Classmate IP address 10.xx.yy.5. Check?
i typed 10.6.40.5. but nothing showed up

Router IP address is 10.xx.yy.4. Check?
same thing for the classmate IP address

Open a browser on the Classmate and type 10.xx.yy.4 into the address box and you should see the router's setup screen. Check?

Follow the instructions in this document and tell us at which step the problems start.

Re: Linksys Router (WRT610N V1) Connection Problem
 

i plugged it into the modem because i tried to connect wirelessly into the router, but it doesnt work. So i connected the router into the modem, and the laptop into the router.

Re: Linksys Router (WRT610N V1) Connection Problem
 

Each of those words has a meaning, but together in the context of an FRC control system they don't make sense.

You've identified the router as the WRT610N, which is fine. That's what came in the Kit of Parts. But we don't know what "the main modem" is. There shouldn't be a modem anywhere in what you are doing. Help us to help you by describing it in more detail than "the modem".

What part don't you understand?

Do you know what the Classmate is?
Do you know what an ethernet port is?
Do you know what "connected to" means?
Do you know what the router is?
Do you know what an ethernet cable is?

Everything you need to do is spelled out in the Getting Started guide.

Re: Linksys Router (WRT610N V1) Connection Problem
 

I have the same problem as RoboElite640. the only way we can move the robot is by plugging the laptop directly into cRIO by using another ethernet cable...

Re: Linksys Router (WRT610N V1) Connection Problem
 

You have a modem too?

Seriously, RoboElite640's main problem at the moment appears to be insufficient experience with network components and connections in general. We can work through it, if we can get good enough answers to specific questions.

Has it ever worked wirelessly since your robot was running on a competition field at a regional event? Remember that the WGA on the robot had its wireless security activated at the regional, giving it a specific security code. If your router doesn't have the same security set up, the wireless connection will fail. Most teams are never given the WPA password, so setting the router to match is not an option.

The solution is simply to disable security on the WGA. Connect a cable from it directly to the router, use a web browser to log in to its configuration page at http://10.18.65.1/ (those middle two octets are specific to your team), and set the security to none.

Re: Linksys Router (WRT610N V1) Connection Problem
 

i cannot access the configuration page at all though... To answer your first question, it has worked a few times after the competition, however, after that, it has not wirelessly worked at all. I've finally managed to get the router working just yesterday, the bridge is still our only problem... :confused:

Re: Linksys Router (WRT610N V1) Connection Problem
 

Team 358 has a great website....try looking at the Network Troubleshooting document....it is excellent!

http://www.team358.org/files/program...olSystem2009-/

Re: Linksys Router (WRT610N V1) Connection Problem
 

Then you need to make sure the WGA is reset (use a paperclip to push the button behind the hole in the back) and follow the instructions in the Getting Started guide for setting it up from an out-of-the-box condition.

Re: Linksys Router (WRT610N V1) Connection Problem
 

lots of good info here too

Here's a FAQ titled "Accessing Web-Based Utility on WGA600N"

Re: Linksys Router (WRT610N V1) Connection Problem
 

Thank you eerybody! I will work on all the methods later on... But I may get back on here Mondayfor more help if we are still not successful. Again, Thank you! :D

Re: Linksys Router (WRT610N V1) Connection Problem
 

Okay... but what exactly does that mean? (You must forgive me, I am still very new to this...)

Re: Linksys Router (WRT610N V1) Connection Problem
 

Open Chapter 2 at this link:
http://www.usfirst.org/roboticsprogr....aspx?id=10934

Re: Linksys Router (WRT610N V1) Connection Problem
 

There's also an easily-remembered alias:

http://www.usfirst.org/frccontrolsystem

There are links from that page to pretty much everything you need to know. Chapter 2 in particular has sections containing step-by-step instructions for setting up each of the components.

Re: Linksys Router (WRT610N V1) Connection Problem
 

i think what he's trying to say is that he's using an LAN hub in between the classmate and the router because he couldn't access the wireless network

Re: Linksys Router (WRT610N V1) Connection Problem
 

Chelsea,
If you follow each step (don't skip one) in the links you should be able to get some connection. Do not rule out the possibility that the router has failed. Although this is one of the newer devices, many manufacturers have been suffering with cheaply made capacitors from overseas. I had a different model Linksys die that was a little more than a year old. Bad caps in the power supply were causing all kinds of problems. If you are still having problems, try contacting the computer staff person for your school and see if they can walk you through it. If you can't do that, perhaps a team in your area might be interested in coming over to help you.

Re: Linksys Router (WRT610N V1) Connection Problem
 

Here's what things should look like:

[CLASSMATE]===[ROUTER] o))/((o [WGA]===[cRIO]

You're saying he's talking about adding a hub in the middle of the wired connection between the classmate and the router?

[CLASSMATE]===[HUB]===[ROUTER] o))/((o [WGA]===[cRIO]

That doesn't make sense either. Your words seem clear and unambiguous to me, but I don't have a lot of confidence that they mean what you want them to.