Chief Delphi - Using a DS to control a FRC robot

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Using a DS to control a FRC robot (http://www.chiefdelphi.com/forums/showthread.php?t=87584)

Re: Using a DS to control a FRC robot

Okay, so it's CRC-32-IEEE. Cool.
AustinSchuh, this means the polynomial is 0x4C11DB7.

Now I just need to fix my CRC32 algorithm.

Re: Using a DS to control a FRC robot

I sincerely apologize for necroing this thread, but I have made progress on the robot control via a DS.

I have made a pygtk gui for Team 2-something's arduino robot interface.

NOTE:
I have not had the time to test this on any non debian-based os. I am assuming it will work where pygtk will though.

I have "broken ground" on a DS Gui for this, but have not included it in this prototype.

Please comment on any bugs, as I have tried to fix every glaring problem, but just realized i neglected to comment pretty much at all while making this beta.

Thank you all :)