Communication Between Driverstation and the Robot Main
 

Hey does anyone know how i can us a boolean controll on the dashboard to set a certain value on the deployed robot code? Im using labview.

Re: Communication Between Driverstation and the Robot Main
 

Simple answer: It is very difficult. This would require you to write a TCP communication system, to send that bit of data.

Somewhat helpful answer: You can use the Virtual IO if you aren't using the Cypress board.

Re: Communication Between Driverstation and the Robot Main
 

The Dashboard is for display only. It can show you what the robot is sending, but it can't do anything to change what the robot is receiving.

If you want to change a boolean value during development, you can put a control on the Robot Main front panel, then simply run Robot Main instead of building and deploying it. Part of the build process strips the front panel from the VI, so you won't be able to do that during competition.

If you want to change a boolean value using code you've set to run as startup, you have two options. Either use a physical control on a USB-connected device (joystick, gamepad, or Cypress I/O module), or use one of the emulated Cypress switch inputs in the Driver Station application.

Re: Communication Between Driverstation and the Robot Main
 

...A TCP communication like the ZomB Dashboard! Alpha 5 has support for sending stuff back to the robot. (C++ only at the moment, I'm currently in the process of making java and Labview bindings). Is it competition legal? possibly, the GDC last year said yes and no, but it is definitely legal for dev use.

First forge site: http://firstforge.wpi.edu/sf/projects/zombdashboard