Chief Delphi - pic: 254 2010 Gearbox 4

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: 254 2010 Gearbox 4 (http://www.chiefdelphi.com/forums/showthread.php?t=88094)

craigboez

25-12-2010 00:45

pic: 254 2010 Gearbox 4

loading photo ...

Chris is me

25-12-2010 00:46

Re: pic: 254 2010 Gearbox 4

I understand the use of the three position piston for the drive shifter; you need to throw it into neutral for the hanger to work... but why is the dog for the hanger a 3-position shift? Isn't their just "engaged" and "disengaged"?

Jeff 801

25-12-2010 00:54

Re: pic: 254 2010 Gearbox 4

It almost looks like there is gear engaged, neutral, and a lock because on the plate to the far right it looks like there is a dog cut into it.

Cory	25-12-2010 03:11

Re: pic: 254 2010 Gearbox 4

Quote:

Originally Posted by Jeff 801 (Post 988402)

It almost looks like there is gear engaged, neutral, and a lock because on the plate to the far right it looks like there is a dog cut into it.

This is correct.

Jeff 801

25-12-2010 18:58

Re: pic: 254 2010 Gearbox 4

I am confused. Why there is a need for that lock when you have a pawl and ratchet on the shaft already?

NickE

25-12-2010 19:38

Re: pic: 254 2010 Gearbox 4

Quote:

Originally Posted by Jeff 801 (Post 988466)

I am confused. Why there is a need for that lock when you have a pawl and ratchet on the shaft already?

To lock the arm down before we deploy it. Otherwise it might bounce up while crossing a bump or getting hit.

All times are GMT -5. The time now is 13:55.