Chief Delphi - Unplaced ubertubes

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - Unplaced ubertubes (http://www.chiefdelphi.com/forums/showthread.php?t=88375)

Team 2811

11-01-2011 14:41

Re: Unplaced ubertubes

Quote:

Originally Posted by Alan Anderson (Post 996955)

I don't understand the question. What does "dead" mean here?

Dead means you cannot use the piece anymore. As in during Teleoperated mode when placing an ubertube on a pin would result in a penalty.

I have a question. If you robot happens to be placing an ubertube on a pin right as the buzzer goes off and ends autonomous period but your robot finishes placing the ubertube on the pin just after the buzzer goes off then do you get a penalty?

Taylor

11-01-2011 14:45

Re: Unplaced ubertubes

Quote:

Originally Posted by Team 2811 (Post 996970)

I have a question. If you robot happens to be placing an ubertube on a pin right as the buzzer goes off and ends autonomous period but your robot finishes placing the ubertube on the pin just after the buzzer goes off then do you get a penalty?

Sounds like a great entry for the official Q&A when it opens. Keep in mind any answer here would be merely speculative unless linked to an official source.

johnnyburns35

11-01-2011 17:27

Re: Unplaced ubertubes

if you put all three ubertubes on the same level 3 pegs and then create the logo over it would you get more points then you would if you separated them and then created a logo over just one ubertube of the three pegs?:ahh: (sorry if it dont make sense)

EricH

11-01-2011 17:42

Re: Unplaced ubertubes

Quote:

Originally Posted by johnnyburns35 (Post 997140)

Yes, you would. You'd get the doubled value for each peg instead of just one.

But you have to place them autonomously.

All times are GMT -5. The time now is 13:50.

Page 2 of 2

Show 100 post(s) from this thread on one page