Chief Delphi - FRC Driver Station Re-image, Will it still work with 2010

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - FRC Driver Station Re-image, Will it still work with 2010 (http://www.chiefdelphi.com/forums/showthread.php?t=88392)

tsa256

08-01-2011 14:42

FRC Driver Station Re-image, Will it still work with 2010

Hello everyone, Happy Kickoff

After kickoff my team has been faced with this dilemma. If we re image our driver station Laptop with the 2011 image will it still work with the 2010 control system and be able to connect to our 2010 robot?

Thanks

Joe Ross

08-01-2011 23:50

Re: FRC Driver Station Re-image, Will it still work with 2010

While I don't know that it was tested, I don't think there were any changes that should not make it work.

One of the things we do on 330 is rebuild our previous robot's code with the new software and load it on the old robots. That way, new members get experience with the whole process and we don't have to worry about cross-year incompatibilities.

All times are GMT -5. The time now is 12:54.