2011 FisherPrice Motor
 

It has them listed along with their gear boxes in the KOP BOM as not included. I cannot find anything about them in the game manual. Does these mean we cannot use them at all or if we can how many are we allowed?

Re: 2011 FisherPrice Motor
 

well i dont know about how many are allowed i will have to look more into it but check and see if they are still being manufactured. If they are manufactured commonly and are not listed in the manual as not being used then you can use them from former years. Hope i helped if you need help message me or ask on here

Re: 2011 FisherPrice Motor
 

in rule R48 in the robot section it mentions using fisherprice motors so i am assuming that you can use them

Re: 2011 FisherPrice Motor
 

ok thank you

Re: 2011 FisherPrice Motor
 

It says on the bottom of page 12 of the checklist posted on the kit of parts website that the kit has one. Therefore, one (and only one) would be legal.

What document are you referring to? I haven't been near the KoP at all, so please pardon my ignorance in case something has changed.

Re: 2011 FisherPrice Motor
 

But of course they are in there.

We had 3 pages of "not included" parts - all of which were in fact included. Maybe we messed this up printing the XLS file?

Re: 2011 FisherPrice Motor
 

I am not sure what is up with the xlsx file and all the non included ones, we just disregarded it.

For the official (as far as I know) one http://team2502.com/uploads/rules/2011KOPChecklist.pdf

Re: 2011 FisherPrice Motor
 

I also had an issue. The manual doesn't explicitly state how many fisher price motors and how many window motors we are allowed to use. I know it says that only motors in the kit of parts are allowed but that may refer to the the model, type and brand rather than the quantity. I guess I'll ask as soon as q&a opens up.

Re: 2011 FisherPrice Motor
 

<R45> Motors specifically permitted on 2011 FRC ROBOTS include:
A. all motors, actuators, and servos listed in the 2011 KOP Checklist,
C. one or two additional 2½” CIM motors (part #FR801-001 and/or M4-R0062-12) in addition to those provided in the KOP. This means that up to four, and no more, 2½” CIM motors can be used on the ROBOT,
D. up to four, in any combination, of the BaneBots motors provided in the KOP (RS-775, RS-550, RS-540, RS-395),

Pretty simple,
The only extra motors allowed are 2 additional CIM's. That means if you have 1 FP and 4 window motors in the kit, then that's all you can use.
The only other option is the mix and match of the 4 BB motors.

Re: 2011 FisherPrice Motor
 

There is one FP motor in the kit and the white paper specs are also listed in the motor specs provided in the FIRST documentation area (depending on if you are using a 2010 or 2011 FP motor specs are different)

Re: 2011 FisherPrice Motor
 

i've been lokking into the fisher price motors and in andy mark they only sell the last year model does anyone has a clue where i can get the current model?

Re: 2011 FisherPrice Motor
 

So does this mean I couldn't use http://www.andymark.com/ProductDetai...ctCode=am-0586
because we are only allowed one FP motor?

Re: 2011 FisherPrice Motor
 

Pretty much unless you only want to connect one motor to it

Re: 2011 FisherPrice Motor
 

Darn, I was looking forward to using that.

There's always the CIM-u-lator though.

Re: 2011 FisherPrice Motor
 

If I attach a Banebots motor to a FP gearbox, can I use more of the FP gearboxes? Our team has 5 FP gearboxes from previous years. Also, how do I utilize the FP gearbox's output? Where do I get the hub?:confused: