Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Team 233 robot for 2k11 (http://www.chiefdelphi.com/forums/showthread.php?t=88593)

Kit Gerhart 09-01-2011 20:24

pic: Team 233 robot for 2k11
 

ChristopherSD 09-01-2011 20:29

Re: pic: Team 233 robot for 2k11
 
This other robot of yours looks a lot like it.

Leav 09-01-2011 20:30

Re: pic: Team 233 robot for 2k11
 
I've always wondered how the 233 telescope system works... now is as good a time as any I suppose:
  1. What slides against what? (bearings on a track, grooved wheels?)
  2. How is it extended/retracted? (cable? rack and pinion?)
  3. How much overlap is there between the sections at maximum extension?

Wer'e not particularly focused on a telescoping system for 2011, i'm just curious... :)

Chris is me 09-01-2011 20:30

Re: pic: Team 233 robot for 2k11
 
Well that wasn't so hard.

Can I borrow it?

sportzkrazzy 09-01-2011 20:30

Re: pic: Team 233 robot for 2k11
 
Does it pick up the other two shapes as well as it picked up the tubes in 07? =)

GaryVoshol 09-01-2011 20:31

Re: pic: Team 233 robot for 2k11
 
Slap on some bumpers, and I think you might have it.

bearbot 09-01-2011 20:45

Re: pic: Team 233 robot for 2k11
 
were the minibot going

Akash Rastogi 09-01-2011 20:54

Re: pic: Team 233 robot for 2k11
 
Haha, you actually think that'll make it to the finals of Einstein?? Good joke.

:) Much love for the 233 bots.

MattC9 09-01-2011 20:58

Re: pic: Team 233 robot for 2k11
 
Is this a joke?

Akash Rastogi 09-01-2011 21:02

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by MattC9 (Post 995044)
Is this a joke?

Yes, that is their 07 robot. They were finalists on Einstein.

EricH 09-01-2011 21:04

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by bearbot (Post 995026)
were the minibot going

Probably on the bottom side of that nice pivoting arm they have. They telescope it backwards to deploy.

:p:p

Dave McLaughlin 09-01-2011 21:39

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by Akash Rastogi (Post 995041)
Haha, you actually think that'll make it to the finals of Einstein?? Good joke.

Yes, I do.

ahollenbach 09-01-2011 22:35

Re: pic: Team 233 robot for 2k11
 
XD Our '07 robot is almost entirely disassembled, so it looks like it's back to the drawing board :D

DonRotolo 09-01-2011 22:38

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by ahollenbach (Post 995219)
XD Our '07 robot is almost entirely disassembled, so it looks like it's back to the drawing board :D

Heh. And OUR '07 robot performed horribly, so it's back to the drawing board for us, too...:yikes:

Manoel 09-01-2011 23:12

Re: pic: Team 233 robot for 2k11
 
We are using ours as a counter-example! :cool:

R1ffSurf3r 09-01-2011 23:49

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by Akash Rastogi (Post 995055)
Yes, that is their 07 robot. They were finalists on Einstein.

I didn't detect any sarcasm in Kit's text...

MattC9 10-01-2011 00:00

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by Akash Rastogi (Post 995055)
Yes, that is their 07 robot. They were finalists on Einstein.

Yes I have preveously seen footage of how well the did today a former mentor told me "build 233's robot from'07 all yall will be good"

Josh Goodman 10-01-2011 00:35

Re: pic: Team 233 robot for 2k11
 
Honestly though. I wonder how many robots we see will be similar to this. I would lie if I said 1511 didn't look heavily into the engineering of this robot and create ideas based off of it. If it ain't broke, don't fix it. Beautiful bot. Still.

Astarties 10-01-2011 00:43

Re: pic: Team 233 robot for 2k11
 
When they showed the playing pieces for this year in the video, I leaned over to our team's president and said "I bet some teams will just be modifying their 2007 'bots".

Koko Ed 10-01-2011 00:47

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by ahollenbach (Post 995219)
XD Our '07 robot is almost entirely disassembled, so it looks like it's back to the drawing board :D

Our 07 robot is intact and operational and will probably inspire this years design.
It was a very good robot.

Hawiian Cadder 10-01-2011 00:48

Re: pic: Team 233 robot for 2k11
 
our 2007 robot consistently caught fire after 1-2 min of game-play. we have a very funny video of someone on our team sprinting to kill it and cool down the smoking FP + corresponding victor before an official doused it with a fire extinguisher, suffice it to say we are starting over with our design.

Karibou 10-01-2011 00:57

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by DonRotolo (Post 995228)
Heh. And OUR '07 robot performed horribly, so it's back to the drawing board for us, too...:yikes:

I'm not going to say that ours was horrible, just inefficient and not the way it was envisioned. We'll have several encounters with the drawing board as well.

waialua359 10-01-2011 04:26

Re: pic: Team 233 robot for 2k11
 
I wouldnt be surprised if they used the exact same design plus a provision for the minibot.
It already is able to grab game pieces with its arm over the bumpers.

Many teams in '07 needed a gap in the bumpers for arms that started within the "sizing box" at the start of a match. We're one of them and have brainstormed several ways around it this year.

Jimmy Nichols 10-01-2011 07:09

Re: pic: Team 233 robot for 2k11
 
We used the 2007 game for our Mock Kick-off/Build Season training day with local teams. We also retrofitted an NI control system on our 2007 bot for Fall Training.

We keep telling the students we didn't have a mole, but they don't believe us.

ThaineP 10-01-2011 08:14

Re: pic: Team 233 robot for 2k11
 
Well, that was fast. :p

2007 bot, right?
Nice slide rail extension.

Josh Fox 10-01-2011 08:46

Re: pic: Team 233 robot for 2k11
 
Probably one of my top 5 favorite robots in my 4 years in FIRST.

I can't wait to see what Pink comes up with this year. :)

Mustangs 10-01-2011 09:11

Re: pic: Team 233 robot for 2k11
 
ahem *cough*
can anyone say hacks?

EricS-Team180 10-01-2011 10:04

Re: pic: Team 233 robot for 2k11
 
We spent a good bit of time, yesterday, reviewing the '07 Florida and Championship Finals videos. And, PINK's venerable and trustworthy arm has proven itself time and time again. Believe me, we've played some intense matches against them...arrrrggghhh! and with them <WOOT!>

Expect them to be optimized and tough to beat. ...able to carry an alliance.

...what to do...what to do! :ahh:

Eric

Kims Robot 10-01-2011 10:54

Re: pic: Team 233 robot for 2k11
 
I really really really wish we still had the big CIM so we could do something like this... ::sigh:: back to the engineering drawing board and running motor calculations!

JesseK 10-01-2011 13:01

Re: pic: Team 233 robot for 2k11
 
I saw the game animation and started cringing knowing that 233 is coming to the DC Regional. Heh.

That robot doesn't need a mini bot. It can put up all 6 logos by itself if another team can just feed the tubes to them. It was amazing to watch and play beside.

Jevin H 10-01-2011 14:31

Re: pic: Team 233 robot for 2k11
 
Sadly I don't think we can model ours off my teams 2007 robot as it was a bottom row scoring highly successful ramp bot
Also the fact that I am no longer up north but mentoring a team in the south... I don't see us having any hands on time with the robot in Pennsylvania not in Louisiana where I am stationed and mentoring lol

feverittm 10-01-2011 14:50

Re: pic: Team 233 robot for 2k11
 
We also were looking at a number of successful '07 bots (including Pinks!).

My question seems kid of obvious, but... Why Not?

What changes would be required on a well performing ring-placer from '07:
- Bumpers
- Control System Upgrade to cRIO
- Maybe minibot (probably)
- Autonomous Sensors

I know that no one is really just going to recycle their '07 bot right :) but as designs get stabilized, this makes a good engineering discussion. Is this bot too big; can it make it inside the 60" cylinder during operation or get down to the 5' height and within the frame for starting configuration? Can it reach to about 9.5 feet and place a tube? Can it handle the different sized tubes well?

I am interested from a design standpoint.

Thanks!

Tetraman 10-01-2011 15:04

Re: pic: Team 233 robot for 2k11
 
We will be using the same arm mechanism from 07, though adding some tweaks to make it easier to use for this year.

Arefin Bari 10-01-2011 17:20

Re: pic: Team 233 robot for 2k11
 
I knew I should have kept your telescoping arm while I had the chance. =(

Goosier 10-01-2011 20:20

Re: pic: Team 233 robot for 2k11
 
i cant delete my post:mad:

indubitably 12-01-2011 10:36

Re: pic: Team 233 robot for 2k11
 
Quote:

Originally Posted by Leav (Post 995008)
I've always wondered how the 233 telescope system works... now is as good a time as any I suppose:
  1. What slides against what? (bearings on a track, grooved wheels?)
  2. How is it extended/retracted? (cable? rack and pinion?)
  3. How much overlap is there between the sections at maximum extension?

Wer'e not particularly focused on a telescoping system for 2011, i'm just curious... :)

I, too, would like to know these things.

leo sant'ana 12-01-2011 12:38

Re: pic: Team 233 robot for 2k11
 
Muito Legal esse robo
vão sai na barbada jah
com o robo pronto...

assim fica facil !

hehe..

indubitably 12-01-2011 14:39

Re: pic: Team 233 robot for 2k11
 
Translation please. lol


All times are GMT -5. The time now is 15:22.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi