Chief Delphi - Aluminum Bar Minirobot help!

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Aluminum Bar Minirobot help! (http://www.chiefdelphi.com/forums/showthread.php?t=88671)

EROCK

10-01-2011 13:47

Aluminum Bar Minirobot help!

So last night I sketched a design for a minibot which involved custom wheels. I was thinking of simply getting them machined out of 4" aluminum bar . I then read an FTC parts list which stated that we could only use 1" aluminum bar. Is this true? there is no mention of it in the FRC rules about the minibot but I am still unsure.

Here is a link to the pdf packet

http://www.weatherlyrobotics.org/......_9-15-2010.pdf

Hallry

10-01-2011 13:49

Re: Aluminum Bar Minirobot help!

1 Attachment(s)

Quote:

Originally Posted by EROCK (Post 995809)

404 Error when trying to open the link...

Attachment 9624

Al Skierkiewicz

10-01-2011 14:02

Re: Aluminum Bar Minirobot help!

Quote:

Originally Posted by EROCK (Post 995809)

I then read an FTC parts list which stated that we could only use 1" aluminum bar.

<R92> The following items are the only permitted materials for use on the MINIBOTS:
A. TETRIX components,

H. Aluminum sheet, 90° angle, u-channel, tube, bar,

I don't see a reference here to size.

All times are GMT -5. The time now is 13:01.