Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Inventor (http://www.chiefdelphi.com/forums/forumdisplay.php?f=57)
-   -   Welcome to FIRST 2011 from Autodesk (http://www.chiefdelphi.com/forums/showthread.php?t=88678)

Navid Shafa 11-01-2011 20:55
Re: Welcome to FIRST 2011 from Autodesk
 
Quote:
Originally Posted by inventor_phild (Post 995878)
To assist you with this years robot design we are uploading the 2011 KOP, training materials, and starting a BLOG.
Thanks Phil, I appreciate it! Also, what is the link to your new blog, and where can I find the specs to this year's excellence in design award (there wasn't much information in the game manual, as usual). :)

inventor_phild 11-01-2011 20:56
Re: Welcome to FIRST 2011 from Autodesk
 
Quote:
Originally Posted by ttldomination (Post 997253)
Did anyone seen the Gates Belt Sprockets?
On the Kit of Parts page, select 2011 for Year and enter Sprocket for Search.

The 3 sprockets will display and you can then download each of them.

Let me know if you have any problems with this.

Phil, Autodesk Inc.

inventor_phild 11-01-2011 21:00
Re: Welcome to FIRST 2011 from Autodesk
 
Quote:
Originally Posted by Navid Shafa (Post 997418)
Thanks Phil, I appreciate it! Also, what is the link to your new blog, and where can I find the specs to this year's excellence in design award (there wasn't much information in the game manual, as usual). :)
The BLOG and Design Award information are coming. The Autodesk FIRST site was due for maintenance on the weekend and as always with these things it had a few hiccups along the way.

Stay tuned.

Phil, Autodesk Inc.

ttldomination 11-01-2011 21:02
Re: Welcome to FIRST 2011 from Autodesk
 
Quote:
Originally Posted by inventor_phild (Post 997423)
On the Kit of Parts page, select 2011 for Year and enter Sprocket for Search.

The 3 sprockets will display and you can then download each of them.

Let me know if you have any problems with this.

Phil, Autodesk Inc.

Yes I see them, Thank you very much.

mcf747 11-01-2011 23:10
Re: Welcome to FIRST 2011 from Autodesk
 
Hi Phil,

Thank you (Autodesk) for providing vault this year. I wanted to set this up in the off-seasion but could not get my hands on it off the student community website.

Now that I have the vault disk I can move forward but I do not see a product key for vault or inventor or autocad for that matter. Are we supposed to get a key off the student website? I have downloaded my copy of Inventor and the latest key for this year but I was expecting a product key with the packaging.

Any information you could provide would be much appreciated.

-Matthew Forman
Team 1515

inventor_phild 12-01-2011 12:35
Re: Welcome to FIRST 2011 from Autodesk
 
Matthew,

I am checking on the procedure. I think it is as you stated. That is, you get the authorization from the student community. In the meantime you should be able to install with a 30 day temporary setup.

HansJ 12-01-2011 19:56
Re: Welcome to FIRST 2011 from Autodesk
 
I was wondering if the 2011 game pieces are available in Inventor and why I am unable to remove one of the CIM motors from the CIMple box? The CIMple box appears to be one part, and I am not able to edit it.

Thanks.

mpinventor19 13-01-2011 21:33
Re: Welcome to FIRST 2011 from Autodesk
 
Phil,

we recently ran into the snag that our school decided not to uprgrade the inventor software this year so we only have 2010. We cannot open any of the kop in this and need 2011. Will the disks that came in the kop allow us to download inventor 11' onto multiple computers? Also, were on the website would we get the keys for the vault? Thanks for the help.

Team 514
Entropy

bergermeister 14-01-2011 10:03
Re: Welcome to FIRST 2011 from Autodesk
 
Quote:
Originally Posted by inventor_phild (Post 996830)
All,

Yes, Autodesk Vault is now available for FIRST users. If you check the FRC Training material for 2010 you will find a tutorial on how to use Vault.

The KOP should be available today, the new site is taking a bit longer than expected to get up and running.

Let me know how we can help.

Thanks,

Phil
What is the link for the training material for 2010? I'd like to install Vault for Team 181 but can't seem to find the information.

Aaron

roach1051 16-01-2011 15:32
Re: Welcome to FIRST 2011 from Autodesk
 
Phil,

I am a mentor with team 1051, and need help with my Inventor install. I have installed it several times, uninstalling and deleting the files each time I get an error message. Every time it starts up inventor on the install fine, but the next time I try to start it up, all I get is an error report message. I have sent several error reports to Autodesk, but am getting nowhere resolving the issue. Can you help? I can't do any design work until it gets resolved.

Jack

koo_04 16-01-2011 18:30
Re: Welcome to FIRST 2011 from Autodesk
 
Just for confirmation, I would like to know how many activations we can get/have. Thanks, Doug.

joek 26-01-2011 14:04
Re: Welcome to FIRST 2011 from Autodesk
 
Quote:
Originally Posted by Stephen of REX (Post 997131)
I can't open the 2011 KOP in Inventor 2010, do I need to download a new version?
yes, inventor is not back-compatible, you can only open 2010 or earlier files in the 2010 version

joek 26-01-2011 14:05
Re: Welcome to FIRST 2011 from Autodesk
 
Quote:
Originally Posted by koo_04 (Post 1001280)
Just for confirmation, I would like to know how many activations we can get/have. Thanks, Doug.
each account gets a single license


All times are GMT -5. The time now is 09:22.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi