Chief Delphi - 6in or 8in?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - 6in or 8in? (http://www.chiefdelphi.com/forums/showthread.php?t=88909)

paly	17-01-2011 13:04

Re: 6in or 8in?

Higher coefficient of friction is generally better. It means your more likely to be torque limited instead of traction limited. Though a difference of .1 probably won't make a difference.

BrendanB

17-01-2011 13:16

Re: 6in or 8in?

Quote:

Originally Posted by EagleEngineer (Post 1001920)

So which of the two treads would you use, on your wheels?:confused:

Our team went with the wedgetop tread. I have heard that the roughtop has a tendency to wear down faster than the wedgetop.

Our team went with the 6" plaction wheels. I really wanted to use the 4" plactions, but it was going to get a little tricky with the KOP frame and wanting to keep it as simple as possible. The more time we spent on our drivebase is the less time we have driving it!

JamesCH95

17-01-2011 13:26

Re: 6in or 8in?

We are using rough-top in the middle of our dropped-center 6wd for maximum grip.

theprgramerdude

17-01-2011 21:22

Re: 6in or 8in?

We're going with a 6WD 6" dropped pneumatic in the center and with omnis on the corners.

All times are GMT -5. The time now is 09:11.

Page 2 of 2

Show 100 post(s) from this thread on one page