Help! Tetrix Motor Dimension
 

Ok so we do not have an FTC program at our school and there for do not yet have access to a tetrix motor(they are on order). Does anyone have one and if so could they post the dimension of the motor/shaft so that I can start sketching it in SolidWorks?


Thanks

Re: Help! Tetrix Motor Dimension
 

Models from most Tetrix components are available on 3dcontentcentral.com. The motor is available there.

Re: Help! Tetrix Motor Dimension
 

Also if your school is running the Education Edition 2010-2011, most of the Tetrix models in SolidWorks format are availble from the Design Library on the left hand side of the graphics window.

Select Design Library>SolidWorks Content> Robotics and then Ctrl-Click the Tetrix folder.

You will down load a zip file for most of the tetrix parts.

You can add this folder to your design library - under the Add button.

Then all the tetrix parts will be inside of SolidWorks.

Marie

Re: Help! Tetrix Motor Dimension
 

just found the designs... Thank you much!