Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Robot arm (http://www.chiefdelphi.com/forums/showthread.php?t=89006)

josalek 13-01-2011 12:28

Robot arm
 
Is there, in the manual, a place where they talk about the robot arm rules.

Thank you

EricH 13-01-2011 12:30

Re: Robot arm
 
Have you read Section 4?

josalek 13-01-2011 12:38

Re: Robot arm
 
Yes, and there is no specific rules

Stephen of REX 13-01-2011 12:40

Re: Robot arm
 
Exactly. If an arm follows all the rules in there it should be fine.

EricH 13-01-2011 12:42

Re: Robot arm
 
That's your problem. You're looking for rules marked, "robot arm".

That's not the way the Manual works. Pneumatics, electronics, the control system, bumpers, and the Operator Console have their own rules sections, as does the Minibot. You'll notice that there is no rule set for "chassis" or "drivetrain", however.

You have to go through the Manual by the way it's laid out, which is by power/control system with a few specifics. I'll give you a start, though: start with <R11>.


All times are GMT -5. The time now is 06:19.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi