Chief Delphi - Mini Bot wheels

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Mini Bot wheels (http://www.chiefdelphi.com/forums/showthread.php?t=89028)

donp	13-01-2011 16:15

Mini Bot wheels

Are we allowed to modify the Tetrix wheels? Remove or add material?

billbo911

13-01-2011 16:19

Re: Mini Bot wheels

Quote:

Originally Posted by donp (Post 999244)

Are we allowed to modify the Tetrix wheels? Remove or add material?

Ah, that's a good question for the Q&A.

sanddrag

13-01-2011 17:18

Re: Mini Bot wheels

People, the rules interpret like this:

If it doesn't say you can't, you can.

MattC9

13-01-2011 18:07

Re: Mini Bot wheels

were lazer cutting poly carb.

Chris is me

13-01-2011 18:21

Re: Mini Bot wheels

Quote:

Originally Posted by MattC9 (Post 999332)

were lazer cutting poly carb.

Polycarbonate is very difficult to laser cut. You'll get a charred edge and possibly melt some stuff. It can be done but it's messy.

Be VERY CAREFUL that you don't mix up acrylic and polycarbonate. Acrylic is pretty easy to laser cut - but it is not polycarbonate. It's both illegal in minibots and fantastically brittle.

All times are GMT -5. The time now is 21:14.