Re: Can't communicate with cRIO
 

Greetings from Team 2905,
This year we use another laptop instead of classmate. We've download all the updates(Labview Update-Utilities-DS) and image the c-RIO but we cant communicate with the c-RIO.

What may be the problem?

Thanks in advance...

Re: Can't communicate with cRIO
 

I am new at the entire robotics program and have been learning programming and am having a similar problem to this. When I try to run a program through the cRIO on a laptop donated to our team and all of the necessary updates that I personally installed, I recieve no communication with the cRIO.

On the FRC driver station in the diognostics tab, I recieve a light signaling that I have connection with either the bridge or ethernet, whichever I am connecting with, and a light signaling a connection with the cRIO, but I am not recieving a response from the cRIO. On the contrary, my co-programmer's personal laptop and a desktop that we have had donated both recieve communication with the cRIO.:ahh:

Re: Can't communicate with cRIO
 

I'm having a problem understanding "receive...a light signaling a connection with the cRIO" and "not receiving a response from the cRIO" at the same time. What exactly do you expect as a response that you are not getting?

Re: Can't communicate with cRIO
 

The response that I am expecting to get is the communication with the cRIO, which I am not receiving, even though I have connection with the cRIO and the method of connection, whether it be the bridge or the Ethernet link.

Does that help your confusion?

Re: Can't communicate with cRIO
 

Sorry for not posting my last results with cRio. I found that my laptop had Symantec Anti-virus that was blocking any communication with 10.16.35.2, which was the IP address of the cRios, which was pingable. I completely unistalled Anti-virus and was able to proceed with cRios imaging, after I located the cRios image file and conifgured the cRios imaging tool to find it and format the cRios using it. It was all downhill after that!

Thanks for all your help, fellow forummers, and I hope that helps those of you that are experiencing similar symptoms.

Re: Can't communicate with cRIO
 

Hello, I have been trying to configure my team's crio but am unable to connect it. My Computer is as follows:

Ip Address - 10.8.42.6
Subnet - 255.0.0.0
Firewall and Antivirus is turned off.
Ethernet is plugged into computer to port 1 on the crio.
Wireless is turned off.
Labview and Driver Station is updated.

When trying to use the crio imaging tool, it tells me that it can not find the crio and asks me to retry or exit. I have tried reimaging with safe mode on and safe mode off. Also I am using my own laptop and not the classmate. Is there anything I am doing wrong or am not doing that does not let me connect to the crio.

Thanks

Re: Can't communicate with cRIO
 

Never mind about my problem. I just found that it was the Ethernet port on my computer that was bad. Working fine on another computer.