Chief Delphi - Cypress I/O module update

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - Cypress I/O module update (http://www.chiefdelphi.com/forums/showthread.php?t=89082)

Daniel_H

13-01-2011 23:00

Cypress I/O module update

Hello,

reading the pdf "How to Configure Your I/O Module" available at the kit of parts section of the FIRST website, they tell us to

Quote:

5) In the top left of the tool bar, you’ll see a blue folder icon. Click the folder, browse to where you saved FRC_IO.v1.hex, and select the FRC_IO.v2.hex file.

but I could not find such files to download anywhere.
does anybody knows where to get them?
thanks!

Joe Ross

13-01-2011 23:10

Re: Cypress I/O module update

It was installed with the driver station update in the <public documents>/frc folder.

jhersh

14-01-2011 03:05

Re: Cypress I/O module update

Also, for anyone interested in modifying the firmware for the I/O module, remember that the source code is available at FIRST Forge. It's been quite a while since Bill's blog stated that it was open sourced.

-Joe

Daniel_H

14-01-2011 12:25

Re: Cypress I/O module update

I just had an even more elementary problem.
The PSoC programer doesn't recognize the IO board.
Just below the Port Selection, where it should appear, it is blank and I can't get it to appear there.
I believe the driver is not installing correctly.. Is there a driver file anywhere so I can install manually?

jhersh

14-01-2011 13:27

Re: Cypress I/O module update

Quote:

Originally Posted by Daniel_H (Post 999944)

The driver is installed with the Driver Station Update.

All times are GMT -5. The time now is 23:03.