Chief Delphi - DLink 1522

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - DLink 1522 (http://www.chiefdelphi.com/forums/showthread.php?t=89280)

Quote:

Originally Posted by Daniel_H (Post 1005402)

so, I just need to configure the radio as says on the manual and have my passphrase "1156WPAKEY"?

When you're done configuring it, you will be running in Access Point mode. The passphrase in the instructions is for Bridge Mode, which you won't be using until you configure the DAP at a competition event. I think the passphrase shown is just an example, and the actual passphrase will be set for you by the configuration kiosk software.

Quote:

I can imagine it working while on driver station mode, but how about during the developing code period where we don't use the driver station software?

Will you be using the Classmate to do your software development? If so, no problem. Otherwise, either connect your development computer to the "1156" wireless network or plug it into the router directly.

Quote:

btw, I wish I could test this stuff by myself and save you the time of answering these elementary questions, but today we managed to burn our kOP's router (220V outlets and my careless apprentice..) and we're having a hard time finding an identical one here in Brazil.

It is possible, indeed likely, that you only fried the power adapter, and the DAP is still perfectly okay. If that is the case, you should be able to power it from the robot as intended.

Quote:

Originally Posted by Alan Anderson (Post 1004004)

The manuals indeed say nothing regarding last year's router. That's because last year's router is not used this year.

we were planning to use last years bridge instead of the d-link. is that allowed?

Quote:

Originally Posted by DGH (Post 1006323)

we were planning to use last years bridge instead of the d-link. is that allowed?

No, see <R52>.

Quote:

Originally Posted by Mark McLeod (Post 1002844)

The D-Link must be in AP mode to connect to the Classmate.

10.15.29.5 is correct for your Classmate/Driver Station.

Try it with security turned off.

Alright, so we can't get past the step where you change your settings in bridge mode. I know your post is pretty straight-forward, but I just wanted to double check that we in fact do not need bridge mode? Because when we try to change the settings in IE, it saves the settings for Wireless, but not for Network.
Tl;dr: We can just get away without setting up bridge mode?

Quote:

Originally Posted by jeleser (Post 1007308)

You won't be using your DAP as a bridge until you go to a competition event. If things go as I expect them to, there will be an automated "FRC Radio Kiosk" that will set up everything for you.

Quote:

Because when we try to change the settings in IE, it saves the settings for Wireless, but not for Network.

How do you know it isn't saving the settings? If it's just a matter of failing to show you a confirmation screen, that's easy to explain -- you've just changed the DAP's address, but your computer is still trying to connect to the original address.

Quote:

Tl;dr: We can just get away without setting up bridge mode?

You don't need to set up bridge mode for development at home. You won't be using it that way (unless you do some fancy undocumented networking setup using other equipment that might work okay but is neither supported nor sanctioned this year).