bridge/router comunication
 

My team has the first router that came in the 2009 KoP, and now also the new D-link bridge. I setup the bridge, and reimage the cRio, but now i cant comunicate them.

should i setup something on the old router?

thanks

Re: bridge/router comunication
 

The old router and game adapters should not be used in 2011. The new D-Link router you received in the KOP replaces both the game adapter and router. The Classmate now connects directly to the D-Link router on the robot.

Read the "How to Configure Your Radio" manual here: http://www.usfirst.org/uploadedFiles...Your_Radio.pdf

Re: bridge/router comunication
 

I read this manual but i didnt understand it. How do i use one D-link to conect the pc with the robot? will i use the classmate wireless board to conect with the bridge (that will be in the robot)?!

by the way i dont have the classmate anymore! im using one pc as driver station...

Re: bridge/router comunication
 

Your Driver's Station laptop connects directly to the wireless network broadcast by the D-Link router on the robot.

Check the last two pages of the radio configuration guide under the heading "Configure a Radio for Access Point Use." Steps #1 and #6 are very important:

Then simply connect your Driver's Station to the wireless network being broadcast by the D-Link router on the robot.

Re: bridge/router comunication
 

Its working! Thanks!