Possible Error in KoP
 

It seems as if the C-Channel (am-202) parts in the Autodesk KoP are inaccurate:
The axle holes on the left start at 4in from the end, and the ones on the right start at 3in, making the part asymmetrical. I noticed the problem as I was trying to assemble the C-Base, and as-is, it is impossible to assemble it.

Has anyone else noticed this?

NOTE: by impossible I mean impossible to put the wheels on

Re: Possible Error in KoP
 

Geremy,

The part is an Autodesk Inventor part and is modeled so that you can modify it to suit your own needs.

In the meantime, I will double-check against specifications from Andymark.

Re: Possible Error in KoP
 

I know we had no issues assembling our C-Base.

Re: Possible Error in KoP
 

we had no problems with ours, everything was in working order.. as i know there are 2 holes from each end.. one at 3 and then another a inch away.. then there is a middle hole.. maybe you got a bad one? look around at some cadd drawings and old frame pieces.. you may need to add your own holes

Re: Possible Error in KoP
 

Geremy2551,

Were you able to resolve any issues with the C-Channel. I checked and it looks good as per the other comments.

Re: Possible Error in KoP
 

I had the same problem, but fixed it manually. All the other parts were fine however.

Re: Possible Error in KoP
 

Our CAD team noticed the same thing. The axel bolt holes were not correctly located in the inventor KOP. It is a very simple change to do though, just relocate that hole with the associated feature.

It is much more of a pain to fix if your CAD team insists on using Solidworks and has to convert Inventor to Solidworks for everything :P.

Re: Possible Error in KoP
 

The SolidWorks assembly of the frame and all the model files for the Andy Mark frame have been posted

http://blogs.solidworks.com/teacher/...olidworks.html

Marie