Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)
-   -   Will IR sense other tape? (http://www.chiefdelphi.com/forums/showthread.php?t=89383)

mariak37 17-01-2011 16:49

Will IR sense other tape?
 
I was wondering if the IR sensors will get distracted by the red or yellow tape on the field where it crosses the reflective tape. I assume that it depends on the calibration of the sensors, so I was wondering if anyone knows exactly what kind of tape will be used (duct tape etc.), what brand... so that I could test it with the sensors.

Thanks!
Maria

Vikesrock 17-01-2011 17:02

Re: Will IR sense other tape?
 
The material for the tracking lines on the floor is not reflective tape. It is 2" wide grey gaffer's tape.

You may find the information in this post useful.


All times are GMT -5. The time now is 08:04.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi