Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   how tall is the pole (http://www.chiefdelphi.com/forums/showthread.php?t=89485)

jr63989 18-01-2011 14:56

how tall is the pole
 
team 1793 his having trouble finding out how tall the pole is supposed to be cut to we have a measurement tooking of 9ft 3in at the kickoff but we want to double check are we right?

Al Skierkiewicz 18-01-2011 15:01

Re: how tall is the pole
 
02 - The Arena Rev-
2.2.5 The TOWERS
section of the manual has all the dimensions included. The First website also has dimensional drawings to make both the real post and target or an economical version.

Jon Stratis 18-01-2011 15:02

Re: how tall is the pole
 
To figure it out, check out the official field drawings here:
http://usfirst.org/uploadedFiles/Rob...20Elements.pdf

Start with page 46, which references all the diagrams used to construct the minibot tower.

Warlord 18-01-2011 15:03

Re: how tall is the pole
 
From the sensor to the floor it is 122 inches.

Of course, the platform at the bottom is 12 inches and the deployment line is 18 inches above that, so technically if you get the minibot right against the deployment line it will only have to travel 92 inches.

thatoneguy23 18-01-2011 15:04

Re: how tall is the pole
 
I'm not sure, but everywhere i look i am seeing 10 foot.

jblay 18-01-2011 21:53

Re: how tall is the pole
 
the top is at 122 inches from teh ground. the cylinder is 12 inches off the ground. the deployment line which you cant deploy the bot above is 30 inches off the ground.

mrmummert 19-01-2011 00:00

Re: how tall is the pole
 
1 Attachment(s)
This is Mr Mummert from 1610 in franklin..this is the one from the Hampton
Kickoff.


All times are GMT -5. The time now is 21:12.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi