Re: Help wiring gyro, then programming... please.
 

Okay,
tested the spliced PWM (needed a female/female) and each connection is fine from end to end.
Then tried putting the gyro on the analog breakout, and checking volts and it seems to be about right, it was 2.5 then increased when I turned in the indicated direction...
So it IS something with our code?
Waiting for the main programmed to get here with his laptop, we will look at the code then... Perhaps we are doing something wrong, somewhere...

Re: Help wiring gyro, then programming... please.
 

In your java proram you need to
a- disable the watchdog
b- reset the gyro
c- enable the watchdog

in this order - the command gyro.reset() takes time.