Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Pro ENGINEER / Creo (http://www.chiefdelphi.com/forums/forumdisplay.php?f=169)
-   -   Modifying Pre built models on Pro E (http://www.chiefdelphi.com/forums/showthread.php?t=89519)

Huskies_Robotic 18-01-2011 20:55

Modifying Pre built models on Pro E
 
I've been working on drafting for the team and i start with the Prebuilt assembly with Chassis and Wheels. My problem is that when I take the middle two wheels out I can save and not lose the rest of the chassis but when i reopen the robot assembly the next day it refuses to regenerate.

P.S. I havent used Pro E for a year and dont remember the limitations. Could someone help me?:ahh:

skotmorris 19-01-2011 10:58

Re: Modifying Pre built models on Pro E
 
I will try to look at this tonight when I'm at the school with the team. I know the kids spent some time to get the long chassis assembled correctly and at the right size, but I have not looked into the assembly structure. I'll post my findings tomorrow.

martin417 26-01-2011 10:26

Re: Modifying Pre built models on Pro E
 
Does anyone know if Pro Program is disabled on the schools version? If so, is there another way to get user input of parameters when you regenerate?

skotmorris 27-01-2011 10:37

Re: Modifying Pre built models on Pro E
 
PTC will be releasing an updated and enhanced KOP this Friday. We had a difficult time getting timely and accurate information from FIRST and their suppliers this year, which has delayed our delivery of a complete and robust KOP. Sorry for the mix up.

skotmorris 27-01-2011 10:46

Re: Modifying Pre built models on Pro E
 
Correct, Pro/PROGRAM is not available in the Schools Edition. It appears Web.Link and J.Link are not available either. Without them, I do not know of way to prompt for input :(


All times are GMT -5. The time now is 06:24.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi