Chief Delphi - how to setup the encoder?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - how to setup the encoder? (http://www.chiefdelphi.com/forums/showthread.php?t=89561)

Valencia

19-01-2011 14:33

how to setup the encoder?

How would you setup the encoder and place it in the robots
and how would it work?

Alan Anderson

19-01-2011 15:55

Re: how to setup the encoder?

To which encoder are you referring?

Valencia

22-01-2011 15:00

Re: how to setup the encoder?

How do you set up the US Digital E4P encoder? We also need the sample program in C++ to control the encoder.

Alan Anderson

23-01-2011 01:50

Re: how to setup the encoder?

Quote:

Originally Posted by Valencia (Post 1005814)

How do you set up the US Digital E4P encoder?

Are you asking about mounting it mechanically, or about connecting it electrically?

Electrically, it has four wires. The "A" signal, +5, and GND go to one DIO connector on the Digital Sidecar; "B" goes to the SIGnal pin on another DIO connector.

All times are GMT -5. The time now is 06:11.