![]() |
Deployment of mini bot rules??
A part of our team is working on the deployment method of the minibot and we were wondering if there were any rules pertaining to this and if so where would they be because we couldn't find any in the rules
|
Re: Deployment of mini bot rules??
The motors of the robot cannot be turned on until the host bot has released the mini bot. There are no Flywheels allowed, and no stored energy. 12x12x12 is the size limit for the minibot.
All I can think of off the top of my head. Hope this helps. |
Re: Deployment of mini bot rules??
you can't use springs, it has to be lower than 18 inches, pretty basic things ::ouch::
|
Re: Deployment of mini bot rules??
Quote:
|
Re: Deployment of mini bot rules??
Quote:
To the OP: the deployment (and end game) rules are found in Section 3.1.5 and Section 1.6 of the Game Manual. There are also a number of Q&A responses regarding deployment; see http://forums.usfirst.org/forumdisplay.php?f=1465 |
Re: Deployment of mini bot rules??
The blue box on G19 says: <G19> means that HOSTBOTS are not allowed to launch the MINIBOT up the pole at the TARGET, or otherwise contribute to the vertical movement of the MINIBOT. Energy for vertical movement may not be stored in the MINIBOT before DEPLOYMENT (except that which is contained within the battery and excluding incidental kinetic energy stored in the motors or wheels, but NOT, for example, in a flywheel).
I take this to mean that you can start the mini-bot motors prior to (or during) DEPLOYMENT-- that is where the incidental kinetic energy stored in the motors or wheels comes in. Not sure why they left gears out of the equation though.. I guess if you have gearing, you can't start your motor early! Quote:
|
Re: Deployment of mini bot rules??
thanks for the comments idk how i missed that lol guess i should of read a lil bit closer
|
Re: Deployment of mini bot rules??
Quote:
Quote:
|
Re: Deployment of mini bot rules??
Ive got a question about minibot deployment as well dose the mini bot have to stay in the 12*12*12 starting configuratuon or can it extend
|
Re: Deployment of mini bot rules??
Quote:
|
Re: Deployment of mini bot rules??
I thoutht so but was worth a shot
|
Re: Deployment of mini bot rules??
Quote:
|
Re: Deployment of mini bot rules??
Quote:
|
Re: Deployment of mini bot rules??
where in the rules does it say we can't use springs??
|
Re: Deployment of mini bot rules??
Quote:
Also see <R92>--you have to use rubber bands or surgical tubing if you want springs, and you can't use them for vertical motion. |
| All times are GMT -5. The time now is 07:53. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi