Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Tetrx Minibot Battery Charge Cycle during Regional Play (http://www.chiefdelphi.com/forums/showthread.php?t=89624)

chemipanda 21-01-2011 16:57
Re: Tetrx Minibot Battery Charge Cycle during Regional Play
 
How long should it take to charge the battery for the first time?

Bill_B 21-01-2011 20:19
Re: Tetrx Minibot Battery Charge Cycle during Regional Play
 
Quote:
Originally Posted by chemipanda (Post 1005182)
How long should it take to charge the battery for the first time?
Ours took 4 hours to charge when new from the box. that was when the charger light turned green. The battery pack was warm at 3h45m and warmer at 4hours.

BTW, I taped a piece of clear plastic with a small hole for the slide switch over the indicator and switch area of the charger. This will keep the small slide switch from reaching the 1.8amp charge rate position by accident.

MikeE 21-01-2011 23:19
Re: Tetrx Minibot Battery Charge Cycle during Regional Play
 
I'm attempting a synthesis of this thread and the dynomometer test results reported on this thread.

A >14V supply gives 40-50% extra power output compared to a 12V supply.
So while the flat 12.5V profile between 0.4 and 1.0Ah is nice, keeping the battery at less than 0.1Ah discharge seems to be the best competitive policy.

Caveat: My knowledge of battery technology is limited, so corrections are welcome.

Al Skierkiewicz 22-01-2011 08:17
Re: Tetrx Minibot Battery Charge Cycle during Regional Play
 
Quote:
Originally Posted by Hugh Meyer (Post 1004625)
Yes, I will run another test at 900 ma. We were closed today from the snow. It will be Sunday or Tuesday before I get to run another test.

What are you looking for in the comparison?

-Hugh
Hugh,
I just think it would be a good test to show the difference in load vs. life for those that don't have the testing you have. I know I won't be able to run the test for a while either.

Hugh Meyer 01-02-2011 16:49
Re: Tetrx Minibot Battery Charge Cycle during Regional Play
 
1 Attachment(s)
Al,

Attached is the discharge curve comparison you requested. One curve shows a discharge rate of 2 amps and the other shows a rate of .9 amps.

It seems there is not a big difference.

-Hugh

Al Skierkiewicz 01-02-2011 17:19
Re: Tetrx Minibot Battery Charge Cycle during Regional Play
 
Hugh,
Very interesting. The amp hour rating stayed pretty much the same while the length of test was almost half. Was the battery warm at the end of the 2 amp test?
Thanks for the data.

IndySam 01-02-2011 17:20
Re: Tetrx Minibot Battery Charge Cycle during Regional Play
 
Quote:
Originally Posted by Chris_Elston (Post 1004720)
That's pretty impressive that this battery hangs on to the voltage for that long in the upper 12 volts. That should keep the minibots pretty consistent in the race to the top even on a so-so charge. Nice work Hugh!

PS: We've been wanting to get one of those CBA II analyzers ourselves. This year might be the year...

http://www.batteryjunction.com/western-cba2.html
A CBA II is one of the best investments we ever made. We haven't had a battery related issue since we got it. We test and rank all our batteries before every competition.

Al Skierkiewicz 01-02-2011 17:32
Re: Tetrx Minibot Battery Charge Cycle during Regional Play
 
Chris,
I bought mine at West Mountain Radio, the manufacturer. Of course they are a great source for Ham Radio stuff too. I hope they get a lot of business and stick around.


All times are GMT -5. The time now is 03:24.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi