Chief Delphi - D link wireless bridge

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - D link wireless bridge (http://www.chiefdelphi.com/forums/showthread.php?t=89628)

Alan Anderson

21-01-2011 11:08

Re: D link wireless bridge

Make sure your LabVIEW project settings contain the correct IP address for your cRIO. You'll see the target address in parentheses after the "RT CompactRIO Target" line in the Project Explorer window. If it's not what it should be (i.e. 10.30.55.1), fix it by right-clicking and changing the properties.

DFZXA

21-01-2011 16:17

Re: D link wireless bridge

Yeah it's set to 10.30.55.1 but that doesn't seem to be the problem. It was already like that and I could deploy the code, but it hasn't worked since I set up the router. I am plugged directly into the robot though not the router.

Mark McLeod

21-01-2011 16:33

Re: D link wireless bridge

Quote:

Originally Posted by DFZXA (Post 1005148)

10.30.55.1

That was a trick question. It should be 10.30.55.02
as in:

RT CompactRIO Target (10.30.55.02)

Alan Anderson

21-01-2011 16:43

Re: D link wireless bridge

Thanks for watching my back, Mark.

Quote:

Originally Posted by DFZXA (Post 1005148)

...it hasn't worked since I set up the router.

In order to set up the router, you had to change the IP address of your computer. Did you remember to change it back? You probably want to set it to 10.30.55.6 or higher.

DFZXA

21-01-2011 22:00

Re: D link wireless bridge

Quote:

Originally Posted by Alan Anderson (Post 1005171)

Thanks for watching my back, Mark.

In order to set up the router, you had to change the IP address of your computer. Did you remember to change it back? You probably want to set it to 10.30.55.6 or higher.

Yeah this was the problem i had as the 192.168 etc.

All times are GMT -5. The time now is 08:09.

Page 2 of 2

Show 100 post(s) from this thread on one page