Chief Delphi - Peg Lengths for Team Field + Team Update #4 = Sad Face

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Peg Lengths for Team Field + Team Update #4 = Sad Face (http://www.chiefdelphi.com/forums/showthread.php?t=89763)

Hallry

21-01-2011 23:51

Peg Lengths for Team Field + Team Update #4 = Sad Face

So according to the most recent Team Update, #4, the 'pegs' sticking out from the PVC peg board are 16'' long, not 14.125''...

...so have any other teams already completely assembled the peg board based on the original measurements? :ahh:

Brandon_L

21-01-2011 23:56

Re: Peg Lengths for Team Field + Team Update #4 = Sad Face

uuuhhh what?!?!

Yeah, we did..

Mike Betts

22-01-2011 02:36

Re: Peg Lengths for Team Field + Team Update #4 = Sad Face

Quote:

Originally Posted by Hallry (Post 1005457)

So according to the most recent Team Update, #4, the 'pegs' sticking out from the PVC peg board are 16'' long, not 14.5''...

...so have any other teams already completely assembled the peg board based on the original measurements? :ahh:

A warning flag should have been section 2.2.3 in the manual:

Quote:

The three SCORING PEGS located on each column extend 16 inches horizontally inward toward the center of the FIELD.

This is from the original rev - manual...

Regards,

Mike

AcesPease

22-01-2011 08:52

Re: Peg Lengths for Team Field + Team Update #4 = Sad Face

Quote:

Originally Posted by Mike Betts (Post 1005535)

A warning flag should have been section 2.2.3 in the manual:

This is from the original rev - manual...

Regards,

Mike

Not sure how most of us could have caught that. 14.5 plus the thickness of the pipe is 16" projected into the field.

All times are GMT -5. The time now is 21:15.