Chief Delphi - Spring Plungers

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Spring Plungers (http://www.chiefdelphi.com/forums/showthread.php?t=89783)

Strykeforce2767

22-01-2011 10:28

Spring Plungers

could we use this on our minibot?
we were thinking it fell under Mechanical Hardware.

Spring Plungers
6 products match your selections
Type Ball-Nose
Spring Plunger Type Spring Plunger
Drive Slotted
Body Material Steel
Body Finish Plain
Nose/Ball Material Nylon
Nose/Ball Finish Plain
System of Measurement Inch
Inch Thread Size 10-32
Body Length (B) .513"
Nose/Ball Projection (C) .025"
Nose/Ball Diameter (D) .094"
Maximum Temperature 180° F

konk25

22-01-2011 10:41

Re: Spring Plungers

Quote:

Originally Posted by Strykeforce2767 (Post 1005640)

springs are not allowed, you can refer to the robot manual to see what parts you can use on your minobot.
http://usfirst.org/uploadedFiles/Rob...Robot_RevD.pdf

Vikesrock

22-01-2011 10:42

Re: Spring Plungers

The word "hardware" in <R92> has been replaced with the word fastener. So no, those would not be legal for use on the Minibot.

Strykeforce2767

22-01-2011 12:08

Re: Spring Plungers

Thanks, we haven't been checking for revisions... I guess we'll do that more often now.

Vikesrock

22-01-2011 12:10

Re: Spring Plungers

Quote:

Originally Posted by Strykeforce2767 (Post 1005752)

Thanks, we haven't been checking for revisions... I guess we'll do that more often now.

Yes, it is very important to keep track of updates to the manual. They are issued on Tuesday's and Friday's and can be found here:

http://www.usfirst.org/roboticsprogr...nt.aspx?id=450

All times are GMT -5. The time now is 16:49.